We also change on 66-1 SW 114 Bit 8 to 0 (Turns off external phone line)
Type: Posts; User: articcat182
We also change on 66-1 SW 114 Bit 8 to 0 (Turns off external phone line)
Guys,
We had two MX-3571's having the code. One the screen would go blank on, the other one just kept popping the code. We ended up having to replace both MFP/SCN PWB's in those units.
I found this...
Thanks John, tried those things, it would not send faxes.
Get to the point of sending, then error out. When receiving faxes, would print out a blank page.
Turned out we had to replace the FX15,...
Heads up - the "Fix" mylars do not address the major issue. Paper clips/staples still get down on the ADF PWB and blow the board. We have been taking off the rear lower panel on the machines to allow...
Had this too, beat our heads against a wall for a while.
Ended up being replacement of the finisher PWB took care of the issue.
Has anyone else been having issues replacing 70 series machines with faxes, and the new 71's not sending or receiving faxes? We adjust the fax settings for a VOIP line ( adjust baud rate, turn off...
Depending on which model an "N" or "V", it's in the main parts guide. Look in Delivery Unit 2
Just so everyone knows, I did a little research and found that this setting is available (and it works!) on MX-2610, 5141 series, and the MX-XX70 series.
Two facts everyone must know about Sharp Tech Support-
1. They take vacation, same as you.
2. The guy that does the password resets, or EEPROM's does not have a back-up
So, say you have a...
Sharp USA does not have a handy guide for the 71 series.. So I will quote from the SM instead.
First Copy out time (MX-5070/6070V) OC in Mono 4.7 secs in Color 6.7 secs, DSPF in Mono 7.3 secs in...
Good Afternoon Gentlemen,
Has anyone noticed any differences between Sharp MX-XX70 series and 71 series? Like warmup time, or first copy out time? Service manuals from MX-3070N all the way...
Multi-page internal print, just one page at a time, does not feed another page until the print is in the drawer
No external accounting, or 3rd party accounting systems
PCU has been replaced...
First of all - Thanks for helping me with this issue!!
I first tested C1PFD, it tested fine, and then I wrapped the spring around the shaft one more time, just for kicks.
Ran copies, no change it...
UPDATE
Ran end of lease on machine, reset everything back to factory, unplugged all accessories (dspf, de28, fax) still does not make a difference in how the machine runs.
Sorry been a busy bee.. All internal prints, one page at a time, does not matter what drawer. Disconnected all accessories, still slow prints, no dsk, have not tried a 2-2, will update after I try...
I have an MX-4070N, been in the field almost 3 years. Copying or printing plain paper out of trays 1-4 (DE28 btw) picks up paper, and doesn't feed another sheet until the first copy/print is out of...
Thanks for everyone's input. It just confirmed my initial thoughts on the demo of the product.
The company I work for is thinking about taking on some xerox products, anything we should stay away from? What devices should we stay away from? Looking for input from multi-line dealers.
Hello my tech friends, what is the manufacture date on a wc 7800i series?
Has anyone tried to clone a virgo series machine 4111-5111 to a 3070-4070 series? Curious if you can even clone...
Thoughts?
I cannot locate the firmware on a Panasonic DP-C264, any help is appreciated!
Recently ran into the this with copy mode only, user codes were turned on.
Brand new install, MX-5141 with a DSK, customer said when they came in there was a E7-80 code on the machine. When I arrived I cycled the power, cleared the code. Restarted and booted up normally,...