"FIXED"
I fixed it with replacing the developer like i said in my last post. I replaced the fuser 2 times thinking it was defective and not putting the right pressure. I thought it was pressure...
Type: Posts; User: Aaronhauck
"FIXED"
I fixed it with replacing the developer like i said in my last post. I replaced the fuser 2 times thinking it was defective and not putting the right pressure. I thought it was pressure...
Thank you everyone for replying back and all your help. Yes I did try printing self colors and it would only do it on black. Yes I did go through all fuser settings In 43 and made sure they were all...
Using plain 8 1/2 X 11 20lb. The 1st tray is also set to plain paper. I was looking towards the fuser pressure, but it doesn't have a gear that adjusts the pressure, there is just one gear on the...
Using plain 8 1/2 X 11 20lb. The 1st tray is also set to plain paper. I was looking towards the fuser pressure, but it doesn't have a gear that adjusts the pressure, there is just one gear on the...
Just plain 8 1/2 x 11 20lb in the 1st tray which is also set to plain. I'm not getting any service codes. I was looking towards the pressure system, there are no gears that work the pressure just one...
Hi everyone! I've had this account for awhile now and read tips from these forums many of times that has helped me a lot throughout the years. This is my very first post and wanna see if you guys...