Belt only works like this
https://i.postimg.cc/tTbrzxn6/IMG-6204.jpg
in manual it doesn’t seems to be like this, but anyway, it works…
now the white plastic from here
61448
I put it...
Type: Posts; User: zmeutz
Belt only works like this
https://i.postimg.cc/tTbrzxn6/IMG-6204.jpg
in manual it doesn’t seems to be like this, but anyway, it works…
now the white plastic from here
61448
I put it...
No doesn’t work, it’s much bigger like you say
L.E.:
solved this is the possition?
61432
but I still get the jamming error J7229 :(
Thanks!
Hi!
today I worked all day to find a solution to this problem…
Paper stuck on finisher exit, I have the new version without black plastic(I don’t have to remove it)
also if I set paper to exit...
hope not, I replaced and I have already 5k prints, I check everyday for changes but everything seems to be ok…
I took all parts from assy and wash them + oil on bearings. Changed cleaning assy...
sorry,
I forgot to specify, it’s C6500
I will edit post
first time was broken the same, on the right…
all of the transfer belt it’s inside the cleaning assy, seems to be stuck there….
I...
Hi,
anyone had similar problem like me?
I have 2 broken transfer belts with maximum 10k copies…
it is an C6500 machine
I didn’t had this problem before…
I changed reseller when I buyed...
Yes, you have right…
I have a few days that I start it like this… it works but it’s annoying…
first Time with a soft brush, then compressed air
second time, took it out soft brush + 99.9% alcool and compressed air
but doesn’t want…
Hi!
Everytime I open machine I get this error C-8403
In service manual it’s adf sensor, at the beginning I clean it and works but now doesn’t work anymore…
machine starts with right adf cover...
Finally solved, I replaced registration frame assy
I think gamma sensor it’s damaged
Thanks for help!
I start to think that the problem starts from gamma sensor,
when I cleaned boards from gamma and color registration sensor can be that I touch this 2 adjustments......
https://i.ibb.co/D5286yt/IMG-0029.jpg
colorful ...
very nice colors ... :D
after gamma adjustment and color registration
https://i.ibb.co/0qdjZMT/IMG-0030.jpg
I will test it later ... but till then I already ordered connectors for both transfer rolls, I think maybe from there is the problem ...
A friends guide me, if the black connector from transfer belt...
I inserted a screwdriver inside the spring and I move it a little bit ... it comes by himself in the right position...
2nd transfer roller pressure mechanism - tested with door opened ... works it...
sorry, I was thinking that you talk about, transfer belt assy ...
that's why I asked about cam...
I have SM and I saw cam at 2nd transfer unit, before fusing unit ...
I will give a try again...
problem not solved ... still persist ...
I will try to check transfer belt, 2nd transfer roller pressure mechanism,
pressure release motor(can I check from service menu if it turn on or off?)...
I say that it's correctly ... smooth area inside the printer... where is a screw and connector with plastic piece that touch the roll
Earth I checked 5 time till now, and again now ... I made also...
developer units are all changed, they have around 5000 listed pages
drums have ~ 10000 pages ...
toner oem
it makes on all colors ...
Hi!
I have a konica minolta c6500 problem...
color density of printing are very low
transfer belt it’s new, corona’s changed...
inservice mode, I set auto gamma adj. and color...
from 10pages printed one it’s like in the picture…
if I print on 90gr paper I don’t have this problem…
Hi!
anyone had this problem before?
I don’t understand from where it starts…
seems that magenta and other colors stops then it put only yellow
I tried , gamma adjustments, laser initial...
Solved
replaced writing unit yellow
Hello,
Anyone had this problem?
When I start printer on “Now adjusting” (color registration) it end with C-4520.
If I try automatic color registration in service mode, it end with C-4501 .
...
Solved
Problem:
Motor of Magenta Laser writing unit
Replaced Laser writing unit
Hi,
Today I got this error and doesn't want to start anymore...
I called tech guy from my location, arrived today, he made some settings, clean it a little bit then error has gone.
I restart...