I guess my brain turned to mush I have replaced the charger assembly but for the life of me I can't remember the clear code I"m in service mode. anyone care to restart my brain. Thanks
Type: Posts; User: Raydicks
I guess my brain turned to mush I have replaced the charger assembly but for the life of me I can't remember the clear code I"m in service mode. anyone care to restart my brain. Thanks
Sorry guys I apparently had the flu and was under the weather, I'm going to try this tomorrow, I did clean the charge unit, as well as the dang motor gears coming apart and having to put that...
last week I had a users newer employee that thought when she saw waste toner full she could fix it. Simple enough right.. No she dropped it not sure on what but it covered the inside of the machine ...
ok thank you, I ordered that and I'll replace it and follow back up :)
Ok so are you saying the Control Panel Touch Screen or the entire control panel with board etc?
If its the control panel with the board does anyone have one in their bone yard?
Thanks Ray
Well I'm back at the non profit to work on this today, we didn't have the drum in stock but we do have DV310 Developer and TN311 Toner.
I was going to try doing the Service Code F-8 but I can't...
I agree but this is a non profit battered womens shelter that has multiple locations, and they don't have a lot of funds typically we only charge them for parts and if its from the bone yard not...
I have a client that moved an office from out of the area to here and during the self move they apparently had thie Bizhub 350 fall over
Ive cleared all the other errors that came up, and the...
I'm getting a Jam code 50 on a printer that did have a piece of paper in the output from drawer 1 if the printer is off for a while It will print one page then will return with the Jam code 50
...
I sent you a PM let me know
I have a need for the fax board for a KM-2560 does anyone have one from a bone yard or new?
if so please contact me I can pay via pay pal if it helps.
Thank you very much.
Ray
I Did that as a temp measure and I found it thru a china source I was just hoping to find it within the usa. I was hopeful maybe a bone yard item or anything.
I've got a customer with an old CS-2550 with a DP-410 Automatic Doc Feeder.
The 16 pin connector cord that connects from the board on the ADF YC1 to the CS-2550 has a intermittent
does...
U906 did not help. I then checked the DP Driver PCB YC1
Pin 1 ground to
Pin 2 & Pin 3 both have 24 vdc
Pin 16 Does NOT have 5 vdc
turns out an intermittent on the 5vdc aka...
I'm sorry I thought my statement covered that.
Acts like no power iment the following:
1. no it does not identify originals are present.
2. No the rollers do not rotate.
3. No the...
a little additional info, it stopped in the middle of a user copying pages
also in Maint Mode item U203, U243& U244 have no effect
Thanks Ray
The ADF on a CS-2550 has stopped picking up the paper from the ADF. Its acting like there is no power to the adf. I have checked to see if the flag to indicate the paper was inserted and it is...
I'll check this morning I thought it was still there even when not using the sheet feeder, so i thought it was a problem with the Slit and the scan glass but I"ll check and let you know.
Thank you.
I cleaned all 3 mirrors and it was a huge improvement! Thank you for the advice so far.
However, there is a light print area in same place. I'm going to assume that my next move is the CCD. I...
Thank you, so you are talking mirror 1,2 & e ( in Figure 2-1-3 in the service manual right? (Page 227))?
is there a need to do anything to the Exposure Lamp the CCD PCP ?
Thank you
I am working on a CS-2550 the Printed pages are great however, the copies pages are light in middle left to right thru the ADF and Smeared Left to right if just on the glass.
200,010 pages, I...
Thanks for all the ideas and advice.
I did replace the complete unit. and everything worked great for about 4 months then today the same code happened.
I don't know if it matters but the user...
Thank you for the advice!
I assume that is the motor assembly with the smaller motor inside ( see attached photo) correct? do you know what the drive voltage is for the motor?
and can the...
during copying the user called and they have a error code C2250.
I pulled the charge assembly and it appeared jammed I think the gear was off a little, I reassembled it and then the wire cleaner...