Ended up being the toner density sensor in the developer assembly. The unit had been vacuumed out without removing the sensor and static popped it. Thanks for all the replies, guys. You're awesome.
Type: Posts; User: jrtwilley
Ended up being the toner density sensor in the developer assembly. The unit had been vacuumed out without removing the sensor and static popped it. Thanks for all the replies, guys. You're awesome.
We tried the used cartridge that was in it when it came in, then we tried a new one off the shelf. The other tech just tried another used one, almost full, with the same result. We can't get rid of...
I haven't run into this issue before, so here goes. A Sharp MX-B201D. Just replaced the drum, process unit and developer. Install its used cartridge and the machine doesn't recognize it. I...
I'm trying to get this one solved myself. Mine's an MX-4141N, but the POD1_FUS jam is driving me nuts as well. One told me that it was thermistor(s). One reply I had was the wire harness on the...
Makes sense to me. This is a machine we use to print for customers here at the shop and the boss said to use its parts to complete another 4141n that we have to use for now. I'll tear it down later...
I have a Sharp MX-4141N with a POD1_FUS jam on powerup. I've replaced the fuser, the POD1 sensor, cleaned all sensors in the vertical path and checked the rotation of the primary transfer belt unit....
I have a customer who has an MX-3501N MFP that, when prompting for new black toner, will not recognized the new cartridge. We've tried replacing with a new cartridge... wouldn't recognize it. Tried...
A customer has a Sharp MX-M200D that is skewing, but only from the bypass tray. I've removed the Manual Paper Feed Unit (bypass ok?), cleaned it thoroughly, stop plate and arm are working nicely, no...
I'm looking for a source for the internal parts (spring, gears, etc.) for the stapler unit in a Sharp MX-FNX9 internal finisher. Sharp does not list any parts for the stapler, probably due to the...
The Canon np6016. Piece. Of. Garbage. Clamshell. Need I say more?
I replaced the Primary Transfer Unit and the Secondary Transfer Unit on a Sharp MX-5111N. I also replaced the color developers. About halfway down the page (portrait), the print turns incredibly...
I'm not much of a talker, but I thought I'd make my presence known, if that means anything to anyone. Been a tech for 11 years now. First, a silver certified Canon tech, and now, a gold certified...