thank you very much for your help
Type: Posts; User: jakani
thank you very much for your help
Hello everyone ,
i have an aficio 2401 machine and i want to move it , but the main machine won't separate from the roll feeder !
any suggestions are much appreciated
thank you
i got this error after the paper exit paper misplaced because the usr didn't know how to pull the paper out after a misfeed
thank you for any suggesstion
thank you for replying , yes i think you are right about the sensor ,
i think it's damaged and i have to change it and see
i tried replacing it with some sensors i have , but it seems that this...
Hello ,
i hope everyone is ok here away from printers jams and codes :)
first i had a problem on the right edge of the drum there was a lot of toner that was not cleaned up ,
i open it and i...
hello everyone ,
i found out that the cyan dev unit was not turning right when i rmeved it i found tonner stuck in front tube and a mix of developer and toner inside the printer , i replaced it...
thanks for your suggestion , no there is no error message or anything ! it prints normally without cyan color
thank you for replying
i did nothing but i'm willing to change the dev unit
hello everyone ,
here i will attach a demo page from two different printers and you can see the difference in colors ! 3783837839
there is no cyan color !
i never had this problem before and...
dear all ,
i used" KONICA MINOLTA Log Management Utility" on "windows 8.1" but it seems that it could no get the log it connects successfully but when it comes to the part to download the log it...
hello ,
i want to reinstall the Oce TCS 500 Control Computer . can you please provide me some information on how to do it or what i will need ?
thank you in advance for any advice or suggestion
hello ,
one of my clients that i work with on a different rang of printers asked me to look to this oce tcs 500 , i never worked on a similar plotter or on canon , but i will try to describe you...
thank you very much for replying and your suggestions
i order the developer i'm going to replace it and see
one thing i noticed is that those black dots is only printed in the morning or when...
thank you for replying do you mean that i need to change the developer
thank you very much for replying
i will do a corona wire cleaning and see
hello everyone ,
i have this machine aficio mp w2401 since two years now i changed the drum once everything else works just fine
anyway lately it started printing black random dots when printing...
thank you for replying
i was not able to find it at first because in the manual it called PH unit ,
i cleaned it and the printer worked as it should , thank you very much for fast replying...
of course i take his advice seriously and i really appreciate it
thank you for replying kingarthur
i just searched the manual for the printhead i could not find it !
thank you very much again , if i could not solve this may be i consult with an other...
thank you for replying
i attached it again
35366
i don't think this printer has a printhead !
hello ,
i have a problem when printing and copying i get a faded line in the middle of the paper
i changed the drum , the transfer belt and the fusing unit
i initialized the counter and did...
thank you again
i installed firmware G20-J6 and it solved the problem
this firmware Fixed some issues of CE301 :
*If printing a specific PDF file, C-E301 occurs.
*C-E301 will occur when...
it is a pdf file , you can click on scan.pdf to view it
no it's the right page size it happens even when i print the counter
i changed the drum recently , what laser should i clean...
hello,
first i know it was a drum problem but it took me some time to change it a month or more then when i had the chance to change it same problem one edge doesn't print out so i thought the...
thank you for replying , but i dont have this special firmware
can anybody send me this firmware at jakani.m@infinity.ma
thank you
hello ,
i have this ineo 454e that it has been used just for copy and its counter reached 1 800 000 , so i wanted to change it with another one and use it in small department as a printer
now...
hi ,
thank you for replying
yes i did initialization and gradation adjust .