blackcat4866, Thank you so much for your great post and spending that much time o me. I am most grateful. Yes, you are correct I have quite a few manuals (user, operation and service manual) now on...
Type: Posts; User: Photo1
blackcat4866, Thank you so much for your great post and spending that much time o me. I am most grateful. Yes, you are correct I have quite a few manuals (user, operation and service manual) now on...
Guys, thank you very much for your advice. blackcat4866, I am quite sure you are right to what actually might be wrong. Yes, some of the things you said went a bit over my head at first but I've...
All my print outs have one line as seen in the photos. The silver roller on the left and a 'line' of toner is left after printing. The same 'line' is left on grey roller. These are easily...
Just to update you. I managed to fix the problems. Removed the panel, unscrewed the nails and undid the cables and then reattached etc. Took photos whist I did all this so I could remember. Panel now...
blackcat4866, thank you. I will see if I can remove it tomorrow. I will follow your instructions. I'll update you accordingly. Best
I'm aware I asked a similar question but now I want to remove the panel fully and don't know how to do it. Naturally, I don't want to damage the machine.
Kyocera 300ci, Anyone have the instructions of how to remove the control panel for this photocopier so I can repair or replace the panel? I have checked the service manual (among others), to no...
Hi, Thank you it worked. I believe if may have been the underneath cover which was a bit loose. All the clips etc were attached fine. Works properly now when positioned at lower position. Seems to...
Hi, How do I remove the control panel for the Kyocera Taskalfa 300ci and the reattach it? Any detailed instructions how to go about doing this with pictures? I can't seem to find the instructions in...