Brian,
Just some additional info regarding linestackers, had some weird intermittent jams, static build up, anyway there is a new mod static brushes to be fitted at entrance as paper enters stackers...
Type: Posts; User: trapps
Brian,
Just some additional info regarding linestackers, had some weird intermittent jams, static build up, anyway there is a new mod static brushes to be fitted at entrance as paper enters stackers...
Brian,
I have had the same problem months ago and it is intermittent.After reseating connectors between units and reloading roms it still reoccured.Eventually i removed the LS and have system as pf...
Some success with stretching the original (gold) c6500 springs or fitting c500 springs(better bet).Know of one that flipped with c500 springs. I swopped c500 blade and springs and fitted it to c6500...
Have a look at pre-reg loop motor pin and gear is worn and has excessive play, you should sometimes get j31 codes intermittently
CMYK, there is a patch for this problem, its heat-related and cause by airflow.Make sure m/c is away from wall and filters are not blocked.
I have seen this problem just yesterday, but more obvious on 300g stock.If i run a halftone 100 on magenta/cyan you see it, however on 80g stock not so pronounced.Did a test in showroom m/c exact...
Apparently for the marks on drum issue, the workaround is to swop one of the other drums in the mc to the black position(which ever one is the problem) and replace the one swopped with a new one.This...
Have you been experience rhs side exchange filter clogging with toner, we just replace or vac more frequent?What about feeding probs 300g stock?
I have heard of fuser gear failure (possible one) but no developer probs besides some new tanks supplied with damaged mylars.
Some faulty write units and premature transfer belt problems had been experienced and marks on mainly the black drums.
Thanks for your response, had one that was giving j 92-01 codes.I looked at drives, fuser exit, sensors in inverter etc.Eventually cleaned rollers on adu,m/c run for 2 to 3 weeks and problem ...
Are there any Konica Minolta techs that have lots of experience on colour 8050 and c500 machines?
Ex-xerox docutech working on Konica Minolta production b/w and colour products for about a year now.
An ex-xerox docutech,nuvera,dp180 highlight color tech presently working on KONICA MINOLTA 920,1050b/w ,c500,8050,c6500 color products.