firmware version. any updates?
ROM Version
MFP Card Version
A7PU0Y0-F000-GC1-G3
MFP Controller BOOT Program
Type: Posts; User: ECA
firmware version. any updates?
ROM Version
MFP Card Version
A7PU0Y0-F000-GC1-G3
MFP Controller BOOT Program
cheers that worked following a power off
in regards to new firmware. is there a manufacture internet server? theres a "update over internet" setting, but that fails. prob due to no server...
dont seem to have a custom screen button
I want ot make sure i got latest firmware. plus need smb2/3 support for scans
anyway under that custom screen menu its all blank. not sure what to do.
49199
Hi all
just bought a C308 with low mileage
want to updated the firmware to the latest (UK). where do i find this?
Also theres a custom boot screen on the machine that i want to remove. would...
Sounded like delicate surgery....
but i have done it.! was a lot of sticky mess on the glass. all good now. THANK YOU
I even went further into the machine and took out the exit rollers to clean...
thanks, i'll try this.
the first cleaning pad came off the end and got stuck in the bloody slot. managed to fish it out after about a hour of swearing.
i'll try and push down on it. with...
ok, i have removed fuser, removed transfer belt
found the idc sensors under belt removed them
cleaned all
now the colour align correctly. must of been the IDC sensors
only problem is the...
thanks for the replies guys
i have already taken this machine to part when i bought it years ago to get it up the 4 flights of stairs (it was so heavy)
anyway.
i have taken out the transfer...
where? you need to point this out to me.
ive got the field service manual.
whats with the yellow not working right on gradiant pattern, but ok on solid?
He didnt do much, just said to order a new yellow drum, cleaned some rollers. yet problems are still there same before he came.
ive been looking into the service mode, but little confused on how...
Hi guys
ive got colour print issues. i tried to get a local tech out to me but they were useless when he turned up.
the colour dont align correctly. and it differs depending on which side of the...
any workaround?
Hi guys
after pulling my hair out on setting up a SMB scan folder on our new domain (server 2019, and freenas).
turns out the workgroup needs to be set as the domain name inorder for the bizhub...
can someone please help me fix this issue?
can seem to fix the colour registration issue out. im not a engineer to get access to parts, im just a IT guy.
cant find IDS, only found IDC?
IDC 1 and 2 shows 4.5v
42892
the issue is back. but im not sure where to start on your message.
first off maybe i just clear all codes/stats?
all colours are offset and blue is marking across further pages.
ive found...
Cheers guys
cleaned transfer belt
gave the PS41 &2 sensors under fuser a little wiggles and blow out lol
cleaned print glass with that rod thing. although the bloody felt end got stuck in hole....
Cheers
i'll look tomorrow.
anyway to test? looking at sensor info in service mode?
Are you able to point me to the location? ref a page out of the field manual if you could please.
unless anyone knows of a service guy that covers Cornwall,UK
It started to happen after replacing the fuser unit
forgetting those C Y M drums etc. what else can it be?
I do need to strip down the machine and clean everything. but thats a mission and a...
L2 L3 L4
im a little out my depth
ive attached all the warnings i can find.
42737427384273942740427374274142742427434274442745
Hi Guys
have a colour reg issue on our C552
ive followed field manual page 728 (18.3.33 Printer 4-color: incorrect color image registration)
cleaned transfer belt (although not dirty)...
got the field manual, but cant find the section. can you point me to it?