Thank you and you are correct. Are those gears available? I did the disassemble and clean but didn't replace the gears. Do you know where I can get those gears?
Thanks for your help.
Type: Posts; User: SwanyG
Thank you and you are correct. Are those gears available? I did the disassemble and clean but didn't replace the gears. Do you know where I can get those gears?
Thanks for your help.
I am wondering if anyone has a parts machine es 3055C (or compatible) with a functional cyan developer unit that I can buy. The customer's is locked up. I've completely disassembled and cleaned....
This scanner apears to not have any Separation Roller Drive. I don't understand how that drive even works. There is a free spinning drive gear on a shaft with a conical gear that doesn't appear to...
Does anyone have a recommendation where to buy front doors and exterior panels. My recent delivery included 3 Ricoh MP-C3503's and they all have broken front doors etc.
I think I got this resolved with a rebuilt HP LJ 4350. The labels come from the auto manufacturer and are not great quality. The "new" HP LJ seems to be working great... fingers crossed. I appreciate...
Thank you, that would certainly be an easy solution.
Gary
Thank you so much for that info. They mostly have the Lexmark MS810's but are now moving into the MS823DN's. They were claiming that they didn't "work" so I just followed their lead... maybe I should...
I'm hoping that someone has a suggestion for laser printer that my customer who is an auto dealer could use for printing their window stickers. They have a number of good printers at the dealership...
I'm cross posting this in hope's of "casting a wider net":
I have a customer who wants a Lexmark MS823DN but I'm having a problem finding one. Any help is most appreciated.
I have a customer who wants a Lexmark MS823DN but I'm having a problem finding one. Any help is most appreciated.
Thank you for the link. I think I found what I was looking for:
303LL07521
Kyocera 303LL07521 (303LL07520) Doc Feeder Torque Limiter, Genuine (B5071)
For some reason this wasn't showing up ...
I have a bad Separation Roller Torque Limiter on a DP-760 and the part number I've got doesn't bring up a picture that looks like it.
Can anyone provide me with the correct part number for the...
Hey All... I have the service manual for the Toshiba eStudio 3508A but can't find the parts manual. The part I need is the circuit board that contacts the chip on the back of the toner cartridge....
Perfect!!
Thank you Skynet👍
Happy Groundhog Day!
I'm having trouble getting the drum and developers out and cannot seem to figure out how to release the transfer belt. Am I barking up the wrong tree? I'm chasing a C7103...
I was wondering if anyone has experience replacing this paper eject ass'y. My first biggest challenge is getting the covers off but moreover, does this replacement require the removal of the scanner...
The part that broke on this IR 3300 is the scan pulley for the mirror ass'y... part number FB5-5226-000.
43124
I can't find the part anywhere and don't even have a parts machine to pull it from....
This machine has the MX-FR52U Data Security Kit installed and the Password has been changed. Sim 24-30 is not an option and the only dip switch on the main board is for the screen calibration. I...
This is the second MP-C2051 I've seen this on. The noise is only during the copy cycle and it seems to be coming from the lower rear of the machine. I've taken the covers off and the noise is loudest...
Thank you everyone for the assist on this problem.
I tried many times and simply could not get the new charger to set down properly on the front end. It was obvious in looking at the slotted screw...
I'm headed back out with the original charging ass'y. What you're describing makes sense in that the charger is too far from the drum on the front since the problem is worst at the front and gets...
Thank you "The_Murph"
Am I out of luck or will it reset on power down and reset?
Does this machine adjust the voltage with the age of the drum? Or could it be something as simple a a drum blade...
I scratched the drum with only 70,000 pages on it so I ordered a new maintenance kit and replaced only the drum and charger.
The drum doesn't seem to be cleaning and I'm wondering if it's because...
Thank you for your replies. I stopped back and went to sp 2208. Only option was "0" so I changed it to "1". I think I locked it in with #/enter key, is that correct? No change.
I should be more...
The customer replaced the toner bottle with an OEM toner that was malformed at the end so that the toner motor couldn't grab and rotate it. I was able to get a different bottle in and turning fine...