Looking for the procedure to set up the one touch send option to a folder on a shared drive.
Thank you! :)
Type: Posts; User: copymon
Looking for the procedure to set up the one touch send option to a folder on a shared drive.
Thank you! :)
Make sure you tell the customer / user to stop slamming the paper trays shut, that's usually the cause of the damage. ;)
Need to program the primary and offset #s on the drum unit to the copier.
Thanks
anyone know the drum program procedure for the c-160 / or np 6016
thanks
Thanks for the response! Yes, it was the lower paper exit sensor flag missing, felt silly I didn't realize that before posting for help.:o
Solved...
I have had nothing but problems with aftermarket drums in this model, stick with the oem drum unit.
Is the firmware for the 3570 the same as the 5070??
There is a sensor tab on the drum unit that is probably broken off which will cause the E-100, I have seen this many times when customers attempt to remove the drum unit poking around in the machine.
NP 2020 was known for the feed clutches to go bad, they are a wrap spring design and I remember replacing quite a few feed clutches in those.
Disregard my first post, I was thinking IR 400 (A1) for some reason.
After market drums IMO never really worked to well in the NP 6035, OEM drum unit is NPG13 drum unit. *3* in service mode for...
Their UFRs tend to not last very long, have had issues with teflon peeling as well.
Thanks, I am still in need of a Canon IR 5020 parts manual.
:oOpps, canuck is correct, I have been working on way to many IR 330/400 (A1) feeders which is what my previous post applies to...
Looking for these IR series parts manuals. Thanks in advance!
goldwing25@comcast.net
Boot rom located on right side, remove small metal plate for access.
That feeder is notorious for problems related to the 4 tractor belts, replace them, the belts simply stretch over time. After you replace the belts adj the middle small black screw below them for...
Thanks!
I have had this same problem several times and it was the exp lamp.
I believe I have the composite supply if anyone should need one.
I need the 5000 parts manual, thanks.
Yep, beware of offices that have different toner laying around, I have experienced customers going to "great desperate lengths" to add any toner they find, which included taking apart toner canisters...
Thanks, what is the drive number on the ones your using?
Looking for a place to buy IR 3300 compatible hard drives, Fujitsu, seagate, as long as it can be added to the IFT. Thanks
A royal, can't remember the model #. But I worked on plenty of Sharp 726 toaster oven machines back in the "Golden years" lol
And I remember doing drum hubs all the time on the old Sharp 741...