Search:

Just had the same issue.
My C258 has G00-X4 fw and i am pretty sure that sata FW was G00-05.
End user just called me because of CD011 errors were displayed.
After printing data, There's no...

Same problems with IU too Magenta and yellow, like you.
Nothing else to do than replace these faulty UI..

B6 not available here too.
Can anyone share this fw please ?

Yeah already done, even without the network cable, the noise is here...

Hi guys,
I have an issue i have never met with a C3351 (around 10k).
When the MFP is sleeping, the main fan constantly runs on then runs off.

The firmware is up to date.
Data clear didnt help....

4.07 is not even available !!
The lastest firmware we got in my country is 4.04...

Ok i managed to access my kyo space.
However no sigh of FW 4.05...

any help ?

We transfer ? :rolleyes:

Could you send it to me ?
I only have 4.04 :/

Hi guys,
When the stapple unit is empty, the machine doesnt even stop and keep printing without error or pause.
someone knows how to block the printer ?

you mean you want to reset counters ? cause you dont need to reset eemc for reconditionning ...

anyone could send me the G00-79 by WT or other ?

Issue solved.
Data clear + user settings > system settings > paper settings > tray 1.

At the begining, even if i did choose tray 1, it still prints with tray 2.

Thanks all for your replies.

Sorry, still the same :/

well i shoud not be understandable.
I know how to choose a tray for an internal print.
The issue is when (for example) i want to print a bird, without touching the screen, the tray 2 is selected.
...

Hi guys,
I have an issue with the default tray fro internal prints.
For example, if i print the demo sheet of the bird, the tray set by default is the number 2. I'd like for each internal prints,...

Yeah, it would fit into olivetti series. You just have to remove a piece of plastic at the top.

already done and still same issue :/

Hi guys,
i know what you gonna say.
Lines of shame = start install process from begining.

But this time,
even if i do it completly, i still have these lines in copy mode.
Before the issue...

[LEFT]No the fuser needs to heat on edge sides before printing LEF because he just did a SEF print.

[COLOR=#222222][FONT=Verdana]

I dont see any DIP sw or even soft switch regarding my issue in...

Hi !
Let me explain my issue :
A Customer has a BZ C558 (with no finisher) and Always does the same job > (8 sheets * 400 copies) with cross sorting (A4 / A4R).

Considering that the C558 has...

same issue, anyone got an idea ?

just enable back SMB v1

some can send boot screen converter to me ?
thanks

Hi guys,
I'm looking for the Konica bootscreen converter, could someone sent it to me ?

Thanks

Someone has KM boot screen converter for boot screen ??