Search:

In the past i have seen TSA sell parts for enevelope feeders, duplexers etc for printers like the 4100. They are canon parts.

Sent from my SM-G900P using Tapatalk

I have some P3015N that I want to make DN. The N already has the duplex tray in it. So what is needed to make them duplex? a DN formatter?

Everyone selling used parts seems to be selling one style...

I think an important question is, what is the average size of your clients? Are you talking to the right people in that organization?

I am involved with another company (not office equipment) and...

Fuser is brand new. I have not tried the old fuser. Registration assy seems fine as registration is perfect.

Fuser seems unlikely as the paper is all the way out and accordianed at the duplexer
...

Ran 600 pages test with duplex option off. 100 from each tray twice. Works great.

Duplex on after 100 pages or so it jams. Removed duplex cover and cleaned all rubber and plastic rollers, blew out...

I was looking to see if anyone knew how to do it without sen ding the boards out. :)

Sent from my SM-G900P using Tapatalk

(notshown)Formatter assembly (LJ 4250/4350 printer, base model)Q3653-679011(notshown)Formatter assembly (LJ 4250/4350 printer, network models)Q3652-679011

This is from page 483 of the manual. One...

So i found this article and it confirms my thoughts
HP LaserJet 4240n, 4250 & 4350, DC Controller - Model change & speed upgrade, RM1-1108-180, The Printer Works

does anyone know how to make a dc...

In the service manual the dc controller and formatter are both universal across the 4250 and 4350. There are different formatters for network and base.

new boards are blank/neutral. So when...

If you have a used controller from a 4350n and a used formatter from a 4250n. What will the machine wind up as?

I say 4350n and we have used 4350n controllers to upgrade 4250n printers with...

Lol yes I know the gear is supposed to move up but it should have the fuser gear touching it......

Sent from my SPH-L720 using Tapatalk

Liberty said all they sold was the 4250 for the 4015 but stopped a while ago. Another smaller vendor doesn't even carry the 4015 version...

Sent from my SPH-L720 using Tapatalk

Well we will experiment and post the results. FYI I have replaced 500+ swing plates. And my fuser builder has rebuilt thousands of these fusers. Never seen this before. We suspect a gear or swing...

We are replacing swing plates on several machines and installing rebuilt fusers. Never had an issue.

Now we have a batch where the fuser does not mesh with the swing gear. With the formatter...

Anyone using or been using the rm1-0699 (4250 transfer roller) in the P4015? We are seeing issues and some vendors tell us the roller no longer works in the P4015, some manufacturing change. Other...

Not sure about that. Out of all the boards we tried, some did come up as a 4015, including one we know that came from a 4015. We also confirmed with a major vendor and they confirmed they supply used...

Well the issue turns out that once a P4000 series board is installed, it stays that way forever and that dictates the model on any machine it is installed in. For some reason everyone on Ebay is...

Anyone have experience installing used formatters into a 4015? Continuing on my other thread, we received 5 used formatters from ebay, assuming they would work in the 4014/4015/4515 and that is how...

we already use pjl to set the model number, serial number etc. But not the model name. I will try that but I think that only changes it on the config page, and does not actually change the machine...

Installed a used formatter into a P4015 and now the machine sits as a P4014. I waited several minutes, power cycled and still a P4014. I cold reset, NVRAM clear, and upgraded firmware with no luck. I...