When I bring up that number it says it is an assembly. When you order is it an assembly or just the belt?
Thanks
Type: Posts; User: df3036
When I bring up that number it says it is an assembly. When you order is it an assembly or just the belt?
Thanks
In the manual it shows changing the belt itself but the belt is not in the parts manual. Just the belt assembly is. Any one have the part number?
I have a couple MPC5502's with the belt migrating to the front of the machine and will then rip. We have replaced the ITB assy along with the cleaning unit and the PTR. Belt migrates again. Machine...
That was before we had a part number that we could order. Have to be creative....
This is a quote from a previous post: (not mine)
There are 2 Gmail SMTP accounts one for SSL and one for machines that do not have SSL capability. So it doesn't matter if the machine supports...
Just for laughs maybe try these DNS servers instead of your ISP
8.8.8.8 Google's DNS
192.168.3.1 Your router.
Even if it gives you an error, it may help point you in the right direction. In...
You may have to try a few times to get the errors to show. See attached.....
I have been using embedded @remote for several years and there was no cost for setup as far as I know. Got a logon, create some registration codes, and off you go. Only had one appliance and it has...
AE040051 unavailable in Canada.
Has anyone found a different roller that may fit?
Dave
In the past when I have HDD errors on these, I just swap the SATA cables between the drives and it ready to go. Done it a few times and have never had to change the drives. All Doc Server is gone of...
Ricoh has posted a bulletin for the MPC4502/5502 with a different Part Number: D144FUSE Micro Fuse
BULLETIN NUMBER: D143/D144 – 022
SUBJECT: REPLACEMENT FUSE PROCEDURE
FYI
Take the fuser cover off and it is on the side as the thermofuses. If the fuser is the original then there will not be an existing fuse. If it has already been replaced then there will be something...
Here is the Fuse...19502
Just got a call on an FT 4522 today and it's still on contract!
If you look back in the thread, you can reset with a thermistor wire mod, use your own pico fuse or order the fuses from Ricoh. $5 each and available...
In the inverter, the foam that the gate hits wears through and the gate sticks to the glue. The timing of the different paper may give the solinoid the time to pull it off. Similar to the problem...
Just swap the hdd cables and turn on. Worked twice for me on different MP 9000's
From what I have read on the TSC forum from someone is that the original fuser does not have the fuse installed. When you order a new fuser it does. To reset the error, take an old thermistor (aw10...
Port 21 only
Machine won't likely recognize your :2121
Found nothing in the manuals to indicate that you could change it from the default.
Dave
FTPS is available BUT...
Fix that worked for me. Copied from some site on the net....
Windows error when installing driver. "Unable to install printer. The print processor does not exist"
I copy the print processor...
Looking to create something similar to:
D-Link - TechSupport FAQ
With other product lines (Sharp) I have been successful with HTTrack or the Scrapbook addon for Firefox. With the Ricoh's, I can...
What was the original call for. "Lost Communication"? Network problem? Spooling? You may want to put the original controller back in and check out some other avenues like the network settings (Duplex...
Think different...
BULLETIN NUMBER: B135/B138 - 012 REISSUE
Laser synchronization error (SC322, SC326)
Laser power is run thru the front door interlocks. Was a problem on 2045's. 3045's are...
I picked up a Synology NAS and the most recent update gives you Cloud Station. Basically you host your own cloud. App like Drop Box for you desktops. You control your data and the amount. 1TB for me....
Don't have the manual handy but is there a nip width test? Stop a solid copy in the fuser and measure the nip. Then compare to a know good machine...