Hi,
I am looking for OKI C833dn maintenance manual. OR How to access service mode of this model. I want to rn color registration adjustment.
Thanks
Type: Posts; User: CopierNerd
Hi,
I am looking for OKI C833dn maintenance manual. OR How to access service mode of this model. I want to rn color registration adjustment.
Thanks
It works with the old browsers only not working with the latest. After enabling SSL on machine it disappears..... thats the problem
Hi,
bizhb c284e firmware with web browser is required. Can anyone share?
Please
Thanks
I have tried both HTTP / HTTPS. Windows 7 has internet explorer. Web interface shows using internet explorer. It doesnt work on Chrome, Edge, Mozilla etc.
Yes, thats right. But web interface gets inaccessible after enabling SSL in Certificate settings. Admin/User mode.
I dont need firmware. I am looking for solution. How to change/Upgrade SSL settings of machine?
Can you share that firmware?
Thats quite right!
Thanks
But the problem is only 1 firmware can be installed and it works. If you try other firmware it gives NG to MFP controller.
Thank you for reply.
This upgrading can be fatal? Difficult to recover. I also need Web browser function.
Hi,
Hope all of you will be fine and enjoying good healthy life!
Model : bizhub c364
Firmware Version: A1610Y0-F000-GD9-72
Problem : We want to upgrade it to the latest version. I dont...
Bizhub C364
Fiery Model E100-06
Error : Turn on the controller
Changed the cables. Network Port light status is normal. Plugged the cable from fiery to the machine both cables ok showing data...
Thanks for the reply and very useful information.
I had selected 20vdc range and it was showing 0.18 and then it started going down gradually. The working battery was giving 3.12 vdc.
Machine...
Finally you are in! Thanks Pal!
How can I get this contributor badge?
If you are referring to Reset tool then I dont have that tool. NVRAM initializer or Resetter.
Where is this option?
Recover data already done. NVRAM Initializer?
Replace Flat scanner cable /Harness.
Error codes are fixed but now machine freezes after few seconds. Stabilizing Image, Ready to Scan. Preparing User Box sometimes on Scan/Fax and machine hangs. HDD Formatted. HDD DISABLED. Disabling...
We have two machines with same error code problem. I checked the batteries in them in off state it was giving 0.8 Volt and 0.17 Volt.
[QUOTE=Naveed Shahid;2451581]yes can change from another working board
but the point is must be 3v healthy batterie[/QUOTE
3 VOLT when machine is ON or even in off state?
Battery pulled out from another working board will work? Its not just changing soldering desoldering.
Hi,
Machine is showing error code C-D390. No board swapping or NVRAM resetting done. It was working fine. After recovering the data it asks for restart. Upon restarting it gives another code...
Hi Experts,
Opinion / Suggestion required!
I am facing a problem with bizhub c454, it feeds paper automatically without command. It picks up paper from tray 1 during startup. When there is no...
It doesn't works. Don't give it a try.
Postscript 3 Unit Type M3 & M4 are compatible with other advance models? If a machine C3004 requires type M19 and C3003 requires type M3. So If M3 is swapped or installed at M19 or in C3004, will it...