One thing that needs to be remembered is that these machines are delicate, and on top of that there are certain things that the factory does not want anyone else messing with. I can change the spark...
Type: Posts; User: jeffreyozz
One thing that needs to be remembered is that these machines are delicate, and on top of that there are certain things that the factory does not want anyone else messing with. I can change the spark...
Thats right....the thread is 4 years old and you stuck your beak in. it was never about churn...it was about the customer doing something that they had no clue about at the time. You need to get a...
It has been awhile since I posted last:
I would image that customers email address into the machine, using his email address as the administrators address. That way when the email does not...
I would not necessarily blame the machine for this. A simple network simulation would rule the problem. One computer and a crossover, and print print print. Next step would be to locally install...
yes it was home edition. If I remember right I set up the smb the same as I did on my xp machine. No tricks, although the network settings dealing with norton had been previously changed, and maybe...
I had set up a smb folder when I got my Vista test machine. I had no problems.
you were right- I did have a fuser squeaking, so I put the old style claws in(from a 1022 kit) and it did have a squeak from the toner hopper- lubed that and whala, nice and quiet. Thanks
thanks for the reply- i am 98 percent sure that it is the fuser- I change fusers and the squeak changes slightly- I have gone as far as to lube the rear gear cluster to eliminate drag-but to no avail...
Check the timer settings- I have slapped salesmens hands for turning the timers way up so that the machine stays at a full ready state for a long time. The factory settings are sufficient for this...
I know you have all come across it, but I have one that I cannot solve. The squeak seems to be coming from the fuser, but if I switch fusers, it is still there. The claws in both fusers are the tsb...
until two weeks from now when it breaks down again.
If I were you I would contact Ricoh directly and complain about the poor turn around. Most repair centers will boast a 48 hour turn around.
If you looked in the manual-it states to contanct hotline-which has changed to contacting your regional representative. There you have it-call a liscensed dealer.:(
The polygon is located in the laser unit obviously. Even though you are a non profit organization, companies send competent technicians to school and spend tons of money on them to make problems...
we had a similar model that was giving a flaky 5?? code. After checking, changing, and rechecking we solved the issue using connection grease on all terminals and cleaning the terminal connections...
which scanning are you doing? I am going to assume that you are setting up twain scanning so that the end user can scan to their pc. you need the twain driver (ricoh-usa.com/downloads) and either...
you need two chapters-sc and sp. service codes will tell you what to check and level of code to clear. Service program chapter tells you how and how to navigate the service program mode of the...
if you have a manual then you should know
dumb question- did you check the white plate for dirt? A dirty white plate can cause this error.
good luck working on a machine that needs a certified tech to keep it running. These are great boxes but are very high maintenence. I am assuming that you do not have a manual to tell you what the...
for the ricoh 1060, if it does not have a controller, you need a controller(which comes with software) and a nib card,which if memory serves me does not come with the controller. The log-in is...
As far as light copies go, force toner into the dv unit, then reinitialize the td sensor, which should hold the quality. Light copies on these machines throughout the generations has been very...
replace the main board nvram.
just for an update- just because the part is new doesnt always mean its good. The thermister was bad.
I believe that they are to a point. I remember that the toner from the 3500/4500 will work on the 2500/3000. Even though each has its own part number.