take a look at the laser unit
Good Luck
Hary
Type: Posts; User: Harry
take a look at the laser unit
Good Luck
Hary
this error pop up at boot so i cant get in service mode also box checker give me Hd -NG
can anybody help me please
Thank you at all
Dear Sir
i cant get in Service Mode| no way
Thank you
Hy ad all
My Boss by this copiers without the hdd there was a mirrorkit installed and i need advice how to reset this. i put a vergine disk in it cannot format and install anything and get error...
a godd day at all
i go out this morning to a costumer for a call. in efektiv the mf print and copy duplex about 10 pages in 5min it was slow. Are there some settings firmware upgrade?
Thank...
thank you
Hy Guys Is there a way to diasable Change Drum message in ADVC 250
Thanks
Harry
check also from bypass it is the same from all papertrays
thank you at all
Need a little help from may friends!
Have a ADV skewing image from all drawers like the example is there an ajust for this can not find anything in the service manual
thanks in advance
harry38946
try 24 power on then after result ok reboot
happy xrismas
harry
had this one this week but no risponse for people ho have just questions
reguards harry
Get out there this morning
Costumer say after replacing the paper it dosent jam anymore thank you at all
thank you phil
sometims it works fin for a couple of days somtimes not.il check this out friday and let you know!
thanks harry
somtimes not always it jam like the picture it seems the paper comes out the wrong way. it has to go in the upper duplex guide to return back in the paper feed section.
Need some adwise from the...
The jam Code is 02 1F00 the finisher jam after about 10 prints
thanks
Use Katun Kynar Dusting Pouch PN 707200
Gruss Harry
Problem Jam Early jam S1 Somebody help mi please!
Reguards Harry
please take out the green corona cleaning assy there was a little plastic mylar to clean the saw corona this short primary corona so put this Whole shit appart. the mf works fine without this thing....
Drum Claw what is that i have not hear this!
Mount the right pressure roller there is a differenz 3225 and 3245 mayby it is the wrong one
harry
change lsu
harry
this is for mi a bad ccd cable or connection issue after 25 years toshiba do canon now and it looks like bad scanner connection
please advice
harry
change or resolder main motor i have had this problem many years ago resoldering do the trick!
good luck
harry
i have clean them in the past with some water and soap under a flush of water works well!
reguards harry
had this one ontime it was triac shorted on ps unit
change triac ore the ps assy
good luck