I accidently erased all memory with sp.5801-1 on Mpc.3503, I had put back all data from Birth certificate, but I still got sc240-4 ( LD error for Margenta ). I replace new laser unit, followed Manual...
Type: Posts; User: Ltd
I accidently erased all memory with sp.5801-1 on Mpc.3503, I had put back all data from Birth certificate, but I still got sc240-4 ( LD error for Margenta ). I replace new laser unit, followed Manual...
. The TD sensor read arround .41
I used AF.1027 pcu. Ofcourse I used SP 2801 to initial the developer. It run good for several days about 2 weeks later I come back for jamming, before I removed the PCU I check the density was normal...
optic and white plate cleaned, internal print also light, no sc codes, copies start to get weaker density because no toner add, forced toner motor ran fine.just not adding toner.Vsg about 4v, vsp...
Drum, developer only had 2K used. Black density seem OK but copy is light look. machine not connect to print . The strange thing is copies look good before I pulled PCU out to check interior after...
I followed Tech Bulletin, Replaced Fusing sleeve roller assembly, Adjusted down temperatures. 2 months later I had same vibration noise from right side again. Any body had solutions ?
I am sure, the actuators did not break or binding, they moved freely. The machine had going jamming problem they broke parts several places along paper paths, then suddenly the display black out, I...
Even no paper on tray 1 and 2, machine still showed it had papers, sensors are connected. Anybody have ideas ?
If I have papers on right tray, left tray had no paper. the thing worked. But If I have papers on left tray , it detected papers and the heights but it did not move the stack to the right cause sc503...
I had above trouble, smtp connection test is OK,Scan file status stated completed. They had 4 machines had same above symton after IT changed something on Servers, someone have ideas ?
I had this problem before, I had to replace controller to fix it.
Thanks guys, I will replace the clutch.
I suspected the black DV drive section may be the clutch cause this problem, DV unit is loosing developer cause zebra looking on copies. the back of machine look confusing.
The front left of platen is sagging, Either lift front left corner of platen by hand ( just a jerk movement ) or used Pry bar to lift it. I always have an 12" pry bar in my tool case.
I had 2 MP5001 on a same company they sit just about 25 feet away each other, one had sc 304 ( Charge roller voltage leaked ) at 65K, one at 33K. I checked Sp2001 value was high close to 1900, Mag...
Push right door while machine is making copies to see any improved on skewing.
Thanks for the informations, I will order the parts .
I agreed with this sugesstion, I done it and jamming was less.
You might need post script installed in copier to work with Mac.
Thanks all for your feed back. I cleared scanner memory, Scanning worked fine with multi pages now.
Customer said he and IT guy could not figure out the cause with above suggestion. They gave up and want me to solve. I have talked with this IT guy 1 time before, he seemed to be an impatient tech.
Yes, yes it have been OFF
I had a MP.2500, Scan to email will scan 18 pages file but with 19 pages or more , copier display message the scan exceeded it capacity, it will not send. what can I do ?
Does anyone have solutions?
Once a while original had 1 portion of lead edge pinched and jammed at ADF glass. I checked for burr at white plate, all smooth. The pinched toward lead edge image side of original. I am confused.