Search:

I did this because I installed all new supplies. The test page in 46-74 looks a lot better but still won't scan.

Well, less than 2 weeks later & only 6k pages f2-78 is back. I went out and cleaned the sensor, replaced drum, dv, mk & transfer kit. The prints look better. I still cannot get 42-74 to work. It...

That sounds like defective or aftermarket toner. I've been wondering about the DV/toner combo on these machines. Especially after Sharp change from 560 to 561. I assumed because 560 had issues but...

So, today I went out and cleaned the sensor & updated the firmware. I ran 44-2 but 46-74 would not work. It prints the page and attempts to scan it but just goes back to telling me to put the page...

Thanks for the firmware. Installed it today. l'll know in 1-2 months if it worked.

I was hoping maybe Sharp has come out with a firmware to decrease the sensitivity.

I am fighting an MXM565 with F2-78. I clean the sensor and it lasts about a month. It had the mylar mod. I replaced the whole right side door assy. from a working machine. Same result. I would...

Would you happen to have instructions for home edition? I just installed a Canon and cannot get it to scan to folder with smb. Thank you.

Desperately need help. Not a Konica tech but have 30+ years in copiers. This machine cycles, optics move & lamp comes on. But, boots into self-diagnostic. If I press start it runs diagnostic &...

I have been told the part I need is not available separately. I am looking for the 2 pulleys that are on the end of the transport rollers. Supposedly I have to order a unit to get them. I cannot...

Anyone know if I can use the 5110 transfer blade in the 5001?

First, Always clean the charge grid & sawtooth. Second, Your problem looks like the teflon is coming off the upper fuser roller.

Has anyone tried putting this in an MX-5001? Parts are all the same except for the diode pwb. Price is lower on these through supplies from Sharp.

Yep, my first thought was the solenoid. Not fun to get to on all trays. I like to clean the adhesive off the arm and cover the pad on the body with scotch tape. This leaves some cushion and keeps...

If they use Chrome you can set up the printer there and they can print from anywhere. I use it all the time.

Does your machine have Postscript of a Fiery? UFRII and PCL will not have a perfect print. Postscript will give you a much better color match. A Fiery will give you more adjustability for picky...

Replying to "tcypy1961" I have had many of these on all the ARM455-MXM450 series. It is always a computer with the wrong drivers on it. IT guys are lazy and put on the first driver they find and...

It's not windows with the problem. It's the settings. CE-00 is a generic code indicating that the scanner cannot reach the folder. Start with a new folder. It must have full permissions. It must...

There are a few reasons this happens. The seal the other guys have mentioned should be replaced every PM. The best way is to order the DV unit cover for the ARM277. It comes with the seal already...

Just another thought. You have a fax on it. Do you have the right cable? Sharps are very sensitive to having the 2 wire cable that came with it. If you use a 4 wire cable it will hold the fax...

Does anyone know who builds this ADF? It is not a Sharp product. I am looking for an alternate source for the hinges. The Sharp hinges are way too expensive.