It seems like the Drum unit is overcharging and taking to much developer from DV Unit. You should replace Drum Unit and developer, not the DV Unit.
Type: Posts; User: Eirik
It seems like the Drum unit is overcharging and taking to much developer from DV Unit. You should replace Drum Unit and developer, not the DV Unit.
Hi,
Tulsa i just discovered the issue on my machine, there may be a high voltage leakage on the MC unit on ur machine.
Models:
MX-M654N/MX-M754N
Hi,
Did you find out what the issue with your machine is?
I have the exact same issue on a MX-M654N, have changed fuser, fuser drive motor and gear and the PCU PWB Card, without fixing the issue
Yes i changed 3 thermostats and both thermistors, didnt miss any of those. But i do think i have an MX-510FU
in the 4112N so the problem might fix itself if i order a new MX-410FU. I shall also...
Update:
The fuser does not heat up after themachine has been turned on for more than an hour.
Still it does not work to upgrade firmware or use fuser trouble cancellation simulation
Hi
I have a Sharp MX-4112N in my workshop that constantly comes up with H2-01 error code (thermistor trouble).
I have changed both thermistors and all the thermostats, still did not fix it. Any...
Hi!
I have a Sharp MX-4112N in my workshop that constantly comes up with H2-01 error code (thermistor trouble).
I have changed both thermistors and all thermostats, and the fuser trouble...
Hi
I changed developer in all dev units, ran the 25-02 Sim, all ok.
After that i had to check the 50-22 sim, all were on NG, then i adjusted the Skew's and i get the error Sub_data_y_f_1st 40
...
Have been looking for Lexmark Service manuals without any luck.
Anyone know where I can look for service manuals?
I need the CX410 Manual right know kinda.