make sure the door is closing all the way . The magnets can come loose and stop the door from closing completely . Thats what was wrong with my unit .
Type: Posts; User: Rick
make sure the door is closing all the way . The magnets can come loose and stop the door from closing completely . Thats what was wrong with my unit .
make sure the door magnets are in place properly
Yes it worked thans again.
sp 5846-046 does not exist only 5846-043 and the next one is 047 all of the ones inbetween dont show up
Or I should have said factory sp mode 5846-046
I understand that if I can find out how to enter factory sp modes and enter 5801-11 and 5801-14 that this would do it . Can some one advise of how I can access
factory sp modes ?
I am trying to log in as the supervisor in order to change the user name and password . When I log in as Supervisor it prompts me for another password and fails authentication . Is there something I...
The colors are fine seems like the problem started with a brand new drum unit and I think its gone defective . I shipped them out another drum unit today to try .
Why would this suddenly change ?
All I ever buy is oem toner . We also performed a forced line adjustment which failed .
This unit is at a field site office in the middle of no where . Not sure of how stable the power is but I imagine if it was too bad the machine wouldn't run at all . Copies and prints were very good...
I brought the machine back to my shop and made all the settings the same as a working unit and it still wouldnt send . It failed right away could they have I will check the sp 5895 to see what it set...
I delivered a 161 to a new customer and set up the scanning to email . I configured it to scan directly to the internet provider using their dns servers and everything was wonderful and it worked...
This machine just started to store fax files in the RX fax standby file section . I pressed the information button on the display but it doesnt show anywhere where the files are or how to get them...
When setting up fax forwarding is it possible to set the machine to forward only to an email address without printing the fax at the same time ? If so what is this called and where do I make this...
I was setting up the email address book from the mfp . I set the email address and save to shortcut and followed all the prompts . But later when I go back and try to find what I saved the email...
Does any one know if there is a back door password to use or how to reset this to a new one . I cant access any settings in this current state .
I just started working on this brand and need some help to remove the password so I can access the programming . Is there a reset procedure for this ?
This customer upgraded their server to a 2008 X64 standard and when trying to find a driver we cant add duplex or bypass tray in accessorie options . Has anyone run into this before and what is the...
Thanks for the info
Hey guys Just acquired one of these in the field and I dont have much experience with this model . Are they good runners ? What problems can I expect from it in the future ?
You were right its quite a dig to get at the shutter motor . Any ways I removed the shutter motor inspected it and reinstalled it . I also removed the laser units and removed the shutter assy . left...
Will the machine still function normally without the shutter unit
This machine just started kicking out this code . I know in the manual is says its a laser shutter problem . I have not seen this before and dont quite know where to tackle this error . Has any one...
I will try that also my IT guy is telling me there is a network mess and on Monday I will try my laptop direct to the copier to eliminate any other networking issues .