Search:

I am not a Sharp dealer . I need firmware and instructions for hard rive replacement. thanks

thanks , Now it's making more sense

Thanks for your help , Went back on Friday and took apart the entire toner delivery system . It prints in black only .Toner is not entering the color developer units because the developer augers are...

I have worked on some the earlier models , so not up on whatever quirk this is . The machine is giving a 92-312 error , but when it's not throwing this error the colors are very faded or not there at...

i'm trying to upgrade firmware , however i don't have info on formatting the thumb drive . Fat32?

I am not familar with this machine . It's displayeng incompatible cartridge . They are compatible cartridges that the customer has used before . I was going to upgrade the firmware to see if that...

I am not a Canon dealer . I changed out the HDD this weeek on a 2020 . Does this machine formatt itself ? or will I need to find firmware for aIRC2020

Thanks , I'll try that

My email ( affix60@gmail.com ) send me an invoice . Thank you !

I replaced a bad DSPF control on a MX-M753 with a board from another machine . It keeps giving a E6-11 code, if I'm remebering correctly. I probably need a shading adjustment sheet , part #...

I replaced the LSU on one of these machines and can't figure out how to input LD parameters .The book is kind of vague , I got into the service mode ok , but unable to change LSU data . Also its...

I appreciate the input from everyone . I ended up replacing the developer again and doing TCR adjust and that seems so far to have fixed the problem . thanks again

Last week I changed out developer and drum kit on this machine because of light copies . A couple days later I got a call for light copies again . So I changed out toner supply motor because it was...

thanks , I appreciate your help .

I have a DV-5205K that I thought went in the 306 , 356 and the 406 . I got a C7401 after doing the calibration . So the CS406ci only takes DV5215K . I just need some confirmation . I am not to...

I want let you know I am not a Xerox tech . This is the only machine like this that service . I recently replaced a upper fuser roller and the cyan drum on the machine , a couple days later the...

I am not a Xerox tech. I was asked to replace a transfer belt on this machine with ( replace transfer belt ) message . So I replaced the transfer belt , When I went to reset the message , none of the...

It has one cassette or( tray 2 ). bypass or hp calls it ( tray one ) .

Message ( paper jam in tray 3 ) . There is no tray 3 . I have had a similar message on a Hp where updating machine firmware solved the problem . I had the customer download drivers and firmware but...

I'm not sure of the DADF model, but it does not have a scanner unit on it.

Only when using the document feeder they get 302-00001 . I cleaned scanner mirrors and it worked for a couple months and now its back only worse. I was told the scanner ribbon cable might be the...

Thanks for your help . I replaced the DV unit and developer. Developer was leaking from bushings.

It is definitely developer . The developing unit does not show signs leaking out the side. However the main charge and the dv unit are originals. I should just update both. I will let you know how it...

Have a customer with a Sharp MX-M620 with 1.8 million prints. Lately it's had an issue with spreading developer in odd places . I find a lot of it in and on the front side of the paper cassettes. It...

Have a IRC2230 that jams paper coming out of #3 cassette that then jams at the #1 tray separation assembly .Paper bumps into the bottom of that plastic piece .I changed out separation assembly and it...