There is no any code.The problem was in the waste exit of the ITB. When try to turn belt by hands it wasn't turning properly, at one point it stopped and started again.
Sent from my SM-G935F...
Type: Posts; User: kyofox
There is no any code.The problem was in the waste exit of the ITB. When try to turn belt by hands it wasn't turning properly, at one point it stopped and started again.
Sent from my SM-G935F...
I tried to fix it with a splatter tape, but it's a same problem. Also tried to cut this piece of a tape and nothing changed. The ITB looks clean, but I'll check again and try what you wrote. Maybe...
Hi friends!
I have a problem with the machine bizhub C253. The print is blurry, actually the colors do not everlap one over the other. I checked contacts on the drums and cleaned sensors, also...
Can you access to the device through the web? Does the machine take copies and faxes, and what about scan? If it's just print problem, return the machine to the factory settings.
Sent from my...
Try to log in to your gmail account on-site. Maybe you have a double security setup for entering the account. For example, if gmail is sending a code to a mobile phone to enter the account. In that...