Search:

I'm having an issue where the unit marked with the sticker FN1 in this FS-532 (the unit that houses the finishers lower registration roller) seems to be falling down. It is almost like it is not...

Any idea what number that one-way bearing is listed as in the DF-620 parts manual? So I will know where to look.

Thank You!

Update: both tray 1 and tray 2 is doing the same now. You can hear a little grinding noise that is very faint just before they pull the paper. I was thinking of changing out the drive unit for them...

I have a DF-620 on a Bizhub 222. As the paper enters the doc feeder it immediatly jams right at the seperation roller as if it has too much tension. All the rollers and the seperation pad and spring...

The jam seems to occur right around the Registration section with just a small amount of paper coming through before it stops. It is always the third piece of paper. The first sheet is already in the...

I apologize I meant the part in the parts manual is listed as "Part /2" in the parts manual...

FS-535 running on a C754e

Random jams occurring with a J72-13 code and paper always stops in the same spot. It seems to be getting caught on just the center tooth of the gate that is called part...

Thank you for the quick reply. I assume this is a common problem with the ADF on bizhub 36's considering I have had a number of them do the same thing.

Upon inspection it appears that the separation roller assembly is not lifting after feeding the paper through. It seems to try and pick up the assembly but it never makes it into the locking...

The only option I have found that is relatively close to changing the default paper size for a fax is under System Menu > Fax > Reception > Reduce RX size. Is this option for changing the defaults...

On a FS-C8525 MFP when a fax is coming in the size of paper is asking for Statement size to complete the job. Is there a way to override the incoming fax to print on letter size instead of the...