Search:

Type: Posts; User: COPYDOCAZ

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. hp designjet 3000 won't turn on.... power supply?

    HP design jet 3000cp won't turn on, have 110 going into the power supply board and nothing coming out, I assume the power supply is shot, This machine has 2 power inputs one seems to be for a paper...
  2. Replies
    3
    Views
    1,076

    Re: task alpha 3500i transfer assy

    no but I threw the old one away weeks ago lonnnng story of an ongoing project and ordering the wrong kit
  3. Replies
    3
    Views
    1,076

    task alpha 3500i transfer assy

    I was doing a 500k kit on this machine when I dropped the transfer assy and broke the motor board. If you have an old assy around you can take the motor off and overnite to me I will pay gladly for...
  4. Replies
    5
    Views
    1,715

    Re: 3552ci toner recycling

    thanks guys very helpfull
  5. Replies
    5
    Views
    1,715

    3552ci toner recycling

    this machine has ruined 2 transfer units which lock up the cleaning motor,.... 2 days after I replaced the last one it started to make an loud noise I ran the motors and the noise came when the paper...
  6. Mpc4500 file transfer screen will not populate

    This customer called and said the machine won't print or scan, when I went in to check the settings for the file transfer the screen was blank would not populate at all
  7. ta 2552C JAMMING FROM TRAY 4 (PF7110) LCT

    When researching this issue I found reference to tech bulletin #107 titled "MEASURE TO PREVENT A PAPER JAM IN THE PF7110"
    I was able to find and print out bulletin 108 but can't find # 107 on the...
  8. inde service business for sale in Phoenix, Az

    Tired of snow, hurricanes, freezing rain, we got none of those (we do have 6 months of 110 and above). Great business for a semi retired person who wants to golf and stay busy. One man show with good...
  9. Replies
    2
    Views
    739

    Mx 4111 charge unit i think

    Getting intermittent streaks that vary in size and length consistent with charge issues changed the grids and new drums and developers, was going to try changing the entire charge unit but can't find...
  10. Replies
    2
    Views
    1,695

    Re: lex C792 firmware

    AHH I will try that first next time ,
    Sorry
    and thanks for the link
  11. Replies
    11
    Views
    12,614

    [Error Code] Re: CLX 9252 HDD Error & #S1-3110

    I am having the same issue here, did we have any final resolution to this problem?


    Thanks
    Mark
  12. Replies
    2
    Views
    1,695

    lex C792 firmware

    I have a lex C792 giving an error 401.03.04< I am replacing the fan motor, but also need to do A firmware update via the USB
    stick. Can someone send me a link for the latest firmware version.
    ...
  13. Replies
    1
    Views
    1,769

    Fuser compatibility c5520 and c6550

    Can someone tell me if a fuser from a c6550 will work in a c5520 they use the same parts but are they wired the same. I have a machine that is erroring out intermittently and would like to switch...
  14. Re: imageclass mf8580 loud thumping and blurr when color

    thanks I should have thunk of that.
    Dhhhh
  15. imageclass mf8580 loud thumping and blurr when color

    this machine is in the shop it is making a loud thumping noise when warming up and when making color copies, have tried a new set of toners for elimination no change. also a blurr every 1in on the...
  16. Replies
    2
    Views
    598

    IR3530 jamming on letter only

    Customer is running letter in tray 1, and ledger in tray 2 and letter r in the bypass. The call was for jamming from tray 1 I replaced the feed tires and still had a jam every time. I tried running...
  17. Replies
    0
    Views
    1,389

    SCX 6545 DADF duplex gate clutch

    The machine shows a constant jam error when I cycle the power the duplex gate clutch rattles but doesn't move to preposition the gate. I have a parts book but I don't see this Item. Has anyone seen...
  18. Bizhub c554 with DF 701 doc feed jamming and multi feeding

    YIKES.... got a feed tire kit..... installed it, problem got worse and the pickup rollers won't lift properly. Yes I probably screwed up putting it together, there are these little plastic legs that...
  19. [Misc] Estudio 207 paperfeed clutch part number

    I have a machine that is shingle feeding, I ordered a new feed clutch, part # 6LH51224000 When I went to put it in the old clutch is a spring clutch and the new one is a mag clutch. I have searched...
  20. Replies
    0
    Views
    1,105

    [Error Code] scx 6545 with fin11x error 07-11

    after replacing the ejector assy got this error 07-11 . I have taken the unit apart several times just to make sure everything was plugged in properly.
    According to the service manual I have a...
  21. SR 790 jamming on 11X8.5 only also need PCL driver

    the finisher jams when the 8.5x11 exits to the top tray other paper sizes are OK also looking for PCL driver.
  22. Replies
    6
    Views
    1,553

    Re: Task Alpha 300ci

    i AM ORDERING THE NEW BELT THANKS FOR THE HELP GUYS
  23. Replies
    1
    Views
    3,351

    dell 3130cn black toner is stuck

    the black toner is stuck in the machine all the other toners come out fine.
  24. Replies
    6
    Views
    1,553

    Task Alpha 300ci

    I have a 300ci that is jamming at the transfer belt I read on this site that there is an update with new Mylars. I need a part number for the kit also the update info.
    Thanks
    Mark
  25. Replies
    5
    Views
    938

    Re: TA 300CI MYLAR UPDATE

    Sorry guys,I did post on the wrong forum, but lets not get violent about it. I will move to the other forum.

    thanks anyway
Results 1 to 25 of 110
Page 1 of 5 1 2 3 4