Screen says time for maintenance (T)
I cannot clear it through normal means, meaning sims 127, 167, 251, 930
maintenance preset counters are set to normal numbers
clock and date are set to...
Type: Posts; User: copydocinc
Screen says time for maintenance (T)
I cannot clear it through normal means, meaning sims 127, 167, 251, 930
maintenance preset counters are set to normal numbers
clock and date are set to...
Imaging unit? Doesn't Kyocera use Drum units? :cool:
You can adjust the altitude setting to highest setting and dpi to highest setting, to fix the light black printouts.
The streaks on the page, that will probably come back.
I would clean out the...
I did set the sleep timer to 1 minute, when I set up the machine out of the box.
I didn't notice the other setting you mentioned "silent mode" Is that in the same area, to change its setting?
So is Kyocera honoring the warranty for these drums or are they doing something else about it? I have a couple that had to be replaced within 8 months and only 25,000 pages total. Exactly the marks...
The power shouldn't turn off from a jam unless a door was opened by pressure from the paper doing its U turn.
Try feeding just 1 paper through the hand feeder on the lower right side of the machine...
I'm sure someone already asked this, but I can't find it.
Are the OEM Kyocera & Copystar toners for the 408ci interchangeable?
I did leave a photo and it does look similar to your photo sample.
For sure I did use these parts out of another machine, but it was not doing this in the other machine, that I could see.
I'll...
I am getting what looks like a faded washout area repeating, kind of. It shows better in a blackout, but it also does it in a print job too, not just copies.
I have replaced dev. unit, drum unit,...
My customer has this Lexmark XM5163, saying that the paper drawer. Tray 1 paper empty.
I can watch the paper lift from the back side and if there is approx 150 pages or less, the lift does not go up...
I have repaired copiers and printers for nearly 40 years, but have no IT experience and I have an issue with remote access.
Well the IT company that my customer is using is saying that they cannot...
I am not reading where you actually turned on the machine. Push the power button, that is under the control panel.
Does anyone here have experience with this scan extension kit?
How and where do I install it and what else is required.
I read that it requires a memory card and possibly firmware reinstalled.
I...
You could try the correct numbers to get into service mode. The numbers you are using are incorrect.
It looks like the same problem I have noticed when using compatible toners.
You can go to sim 147 and change the mode setting to 0 instead of 1
This setting will use less toner
or you can change...
I'm feeling a little stupid here, because I'm not sure how to put it in silent mode. Is that so the buttons don't beep, silent mode? or are we talking about a different silent mode?
I have a customer with a 4002i. Only 50,000 total page count. Using OEM toner.
The machine works great most of the time, but when printing multiple pages, the first 10 or so
look great then it...
The spacing of these smudges looks like possible fuser unit.
Getting code 49.38.07 without printer cable plugged it also got 98.00.00
I have flashed newest firmware. I have uninstalled and reinstalled drivers,
but with network cable not plugged in, it still...
Sounds like your developer unit is not turning, so it isn't adding the toner into the developer unit, thus causing the add toner message.
Check to see if the toner is backing up into the toner...
Ok, so I have a customer with an HP 553 color laser printer and they print out schematic prints and everything looks perfect and then they print to either of the 2 Kyocera machines (3501i or 3051ci)...
I've seen a bad drum ground or arching coronas cause weird electrical issues on this and other models.
Just a thought
It sounds like a similar thing that happens to a lot of printers attached to windows 10 or 8 or maybe now 7.
Probably need to uninstall printer on each computer and reinstall using the drivers from...
I have a customer with a HP LaserJet M605 that is printing a light hue above each letter printed.
It shows up more the bolder the lettering. It even shows up on a horizontal line.
You can see just...
I think you may be onto something here.
I'll have pay attention next time.