Dear all
start key blinking red and MFP not response for any job (print,cop,scan ..) any help
Type: Posts; User: Ahmed Bushara
Dear all
start key blinking red and MFP not response for any job (print,cop,scan ..) any help
Dear all
I have this error, may I have your help I think it is software problem but I don't have firmware
Thanks Awaiting for your kind response
Yes I have but I try to disable it but I can't, I use service manual to find out if I can use deep switch to disable the scanner but I can't find the special number to use through deep switch
Thank...
Dear all
I have a problem consist of two parts firstly when I sent a print job the machine receiving the order , the LED start blinking when receiving job complete the machine does not print the job...
for bizhub C451 you can use type 216 that used on KM C280 it should be genuine one.
Dear Engineer
i have problem on Pro L4160, problem is cyan shadow over the printed media as shown on attached file i review the service manual but i can't find solution.
can you access the service mode!
Dear Thread
try to change drum magenta with cyan! if the problem appear on cyan you should try to clean the charger if you can't do that replace the drum unit.
Dear all
thanks for all, sorry i should explain the error in details sorry for this time, on the other hand i'm certified from Konica Minolta,
code is fusing roller failure to run code"Rank A"...
Dear all
I have error code C 3102 any help.
Dear friend please clean the mirror on the exposure glass.
change the driver that you use.
skew came when printing test pattern and PC printing.
hi. every one i have Skew problem i adjusted from service mode but problem is still any help!
Hi everyone I have problem in bypass dublexing when I finish first side and try to copy next side feeding tack tow paper (frictionpad paperfeed roller are new )any help.
Dear all
How can Activate the SP mode in Ricoh mp 2014 i can't fine yellow key in this model any help.:confused:
Hi every one, is it possibly to duplex from by-pass in MPC3000.
Hi i faced problem lock like yours and i get-ride of it by fixing laser belt connector as shown in photo.
31372
how can i setup user password in Ricoh mp4054sp
_________________
thanks all.
check fusing sensor manually.
Dear all
I have problem with Samsung, problem is memory is full I need to know how I'can rest it & how can I access service mode.
Thanks :cool:
Dear all
I have problem with Samsung, problem is memory is full I need to know how I'can rest it & how can I access service mode.
Thanks :cool:
hi first check if the image is printing on the transfer belt or not before do any thing,some time transfer don't pickup image from drum. if you miss Y&M on transfer belt you need to replace transfer...
Hi you need to replace k pump before that you should check. Toner cartridge if it damage or not and clean toner tunk to be shoor ;) to be in save replace toner cartridge. Also