Hi does anybody no the part number for the stripper fingers that are on the exit door for a DC 250 please.
I have attached a image to show you what I mean
Thanks
Type: Posts; User: Kaz73
Hi does anybody no the part number for the stripper fingers that are on the exit door for a DC 250 please.
I have attached a image to show you what I mean
Thanks
Hi does anybody know the reset code for a 6060 auger 1 fail please.
Any body know the best place in the UK to get a Xerox Fiery Controller Server *CABLE* Digital Color Press DCP-700 the cable i have is not long enough, i really need a 5m plus cable.
Hi can anyone tell me either the part number or where I can buy the white 2 part long brush that is used to clean the ROS's on a 700 etc.
Thanks Xtrain, much appreciated
[QUOTE=tasosGR;466802]XEROX 655N00124 655N124 Oct Repair Kit
Thanks TasosGR, much appreciated
Its the offset catch tray mounted to the right side of the output module.
Hi does anybody know the part number of the catch tray repair kit for a 6060, the 2 white plastic lugs that slide into the machine have snapped off and left the catch tray just hanging. I know there...
Thanks, I have had a look on C2G and this is the item 3m DB9 RS232 M/F Extension Cable Product 81371, Is this the part you recommend?
Thanks again
Oh okay, thanks. what is the best cable to get for this?
No I did not, how do I set to USB to com1 port?
Thanks
XP - Brand new cable USB / DB9 Serial cable, I have tried all the USB ports but still will not connect, I have installed the cable software that comes with the lead as well but still no joy. Am I...
Hi can one help please, tried to connect machine to laptop today but it will not connect I keep getting NO CONNECTION STANDALONE MODE ONLY can anyone help please?
Thanks
Kaz
Hi I'm looking for PWS software for my 6060 plus diagnostic, can any body help. If so please PM me
Thanks
Kaz
Thanks Xtrain, your helps really appreciated, I thought it had something to do with the black as I have just replaced the cartridge.
Thanks again
Hi I have a subsystem fault 009-357, I think the code is dispenser 4 is broken, can anybody tell me what dispenser 4 is please and how to fix.
Thanks in advance
Kaz
I found it it's a chute stopper 003E40480, thanks for your help Milo
Just the plastic pieces that attach to the side of the side of IBT draw, the little spring it still attached to the metal plate so Im guessing it is just the black plastic clips.
Know no sensor from what I can see, there are two black clips either side of the IBT assembly. I have attached a picture of the plate.
Thanks Milo
Kaz2858328583
Hi, please could someone tell me the part number for the metal plate that sits under the IBT belt on a DC6060. I think the plate is there as a sheet smoother, it is held on to the IBT assembly by...