And kyosera went away from mono? good I always liked dual developing systems.......
Type: Posts; User: Raymann
And kyosera went away from mono? good I always liked dual developing systems.......
Finally got it done. The system menu was the enigma that I needed to solve thanks Blackcat4866. and all the other contributors.
Yes it is a mono developer thanks for mentioning that. I have installed a new dv unit but it did not automatically add toner. Was opening door turning off and on........now what am I...
Ok I have a new dv unut. The manual does not give me any clue. When I replace it do I need to run a toner add sim or just run it to fill the dv unit? Thanks Ray
light streaks on doctor blade. I have cleaned doctor blade but keeps conming back. Can I get this apart and purge it or should I just replace the unit? thanks Ray
interesting...but I did not turn off the bulk fax mode just the tti..........I shall investigate soon......
Thanks for the ideas. I have persuaded the customer to use the ADF in the portrait position instead of the landscape. Seems like the easiest fix and it works great. Thanks again
Well today I went out and in the user menu. I checked the bulk fax mode and it was on. However a I turned off the tti in the user menu and it reads the fax job at once. Not sure what the hell tti is...
Still making this thing perfect for my Lawyer account. They have identified a small random blurring on the trailing edge of documents that are printed out from the ADF. The blur is slight and on one...
I am willing to try this even though I am having issues with tx not receiving...Thanks
not sure what a viop is or what the recommendations are. I have been in contact with tec support from Kyosera and have slowed down tx speed to no avail. I can try the pbx switch I will try anything...
Finally plugged in the fax card on this machine. When I use it it hanges on to the pages one at a time. wont go into memory When we send something sends one page then next page..........
Any...
well how much for used one do you have pic? I can get rollers and rebuild myself. Just looking for something that will do 20k over the next few years. thanks Ray
in good shape I will pay the shipping cant be that much what do you want for one? Thanks Ray
Looking for a fuser anyone? thanks Ray
anyone have a fuser for sale? thanks Ray
Can anyone remind me how to get into tec rep mode? I think I need to test paper lift operations and also customer complaining about adf issues. I have not went out yet but is it stop 00 stop 01 ?...
I have a machine that intermittently(dont you love those int probs?) misfeeds when doing 2 side to 2 side in the ADF. I have not seen any crumpling of the paper but I have seen the misfeeding when...
You are correct my fault fs not kn..
Greetings,
I have a machine that intermittently(dont you love those int probs?) misfeeds when doing 2 side to 2 side in the ADF. I have not seen any crumpling of the paper but I have seent the...
Im sure I ran a dv calibration but I do not remember setting drum voltage. Is this an extra step with this machine?
I have rnr the developer not long ago. but its back to smearing toner again. I went back yesterday and cleaned up image unit. But its clearly not going to hold up for long. The toner splattering on...
:pOK now that I removed the screw on the drum shaft....................it comes out nice. cant remember any machine that has a screw there. once you see it duh but sneaky...
I am having this issue. I removed the image cover and two screws but cant slide the image unit out. Seems like I am missing a step. I did not want to pry it out before I asked a Minolta tec if I...
Thanks I got her done. Plenty of covers screws to deal with but that has always been the deal with Minolta. Thanks For the tips they made all the difference