Hello Guys,
I have a customer who prints labels. About 50 sheets per day.
I gave istruction to print labels (A4 sheets) only from bypass and set paper type to "labels".
Lately every day is a...
Type: Posts; User: kyove
Hello Guys,
I have a customer who prints labels. About 50 sheets per day.
I gave istruction to print labels (A4 sheets) only from bypass and set paper type to "labels".
Lately every day is a...
Hi Guys,
Replaced 302RH94230 - PARTS UNIT LOW VOLTAGE 200 SP, problem is solved.
Thank you all!!
Kyove
Tryed U906 - no luck.
Tryed U287 - autorecovery on error C6xxx - no luck.
Error come up on boot. After powering up with the main switch, machine motors turns for a short time, DP make its...
@BlackCat:
Machine gives the same error both at the customer's site and at my site.
@BSM2:
There is no U163 on this model.
Is possible to repair PWB instead of replace it?
Maybe a common...
Hi Guys,
I have a TASKalfa 4012i with C6400 error code.
I read about zero cross signal but other printers are working well (both colors and bw models), electricity is ok.
I tryed to change...
Hi Guys,
My company is about to change Brand.
We always had Kyocera but now it's time to change.
We are a small company that works mainly with rental.
It's not yet decided but now (tech rep) I...
Hi Guys,
My company is about to change Brand.
We always had Kyocera but now it's time to change.
We are a small company that works mainly with rental.
It's not yet decided but now (tech rep) I...
Hi Guys,
My company is about to change Brand.
We always had Kyocera but now it's time to change.
We are a small company that works mainly with rental.
It's not yet decided but now (tech rep) I...
Hi Guys,
I have a TASKalfa 307ci who throws this error codes.
Do you know what does it mean?
I've already update KX print driver on PC and firmware is to the latest version.
Any ideas?
...
Hi Tony,
Yes, it's the exact problem I have on one of these MFP.
When I call Kyocera seems I'm the only one in the world to have this problem so I'm happy to find another one.
IMHO it's a...
Hi Billy,
When you say the "power supply board", do you mean
302ND94630 - PARTS UNIT HIGH VOLTAGE MAIN SP
or
302ND94621 - PARTS UNIT LOW VOLTAGE 200 SP
Thank you in advance,
Kyove
Hi Guys,
I'm having trouble with a TASKalfa 4052ci. Printer is working well, or at least, until doesn't trow an error code.
All is started in June and after many visit to customer I swapped the...
Hi Guys,
Replaced
302L794093 - PARTS PWB MAIN ASSY EU SP - Main PWB on Service Manual
Problem SOLVED!!!! :)
Thank you all, you are good guys!
Kyove
In my case I don't think could be an over heating.
Yesterday I shut down the machine and disconnect power cord. This morning I have the same problem.
I'll change the main board and post future...
Hi Guys,
I've just retired a TASKalfa 2552ci from a customer.
Panel looks like in image attached.
I don't think can be a panel problem. I try to set TA to copy mode and press start to make a...
Hi Guys,
As you already knows, Kyocera has a fantastic program to copy ID Cards.
There's something similar for the scan?
I said to my customer to make a copy of ID Card with the program and...
Hy Guys,
Cann someone send me the charts?
My email is johnfritz74@gmail.com
Thank you in advance,
Kyove
Hi Guys,
I have a TASKalfa 4052ci who gives these error codes in the last month:
C7901, C7903, C7904, C7911.
The first and the last in this morning. Lately things are going badly...
A couple...
Hi guys,
Someone has resolved this problem?
I have a TASKalfa 4052ci. Starting from 1st May got the following error codes:
C7620 (three times)
C7903 (one time)
C7904 (one time)
C7901 (one...
Hi BlackCat,
Can you send me the readme at johnfritz74@gmail.com
Thank you in advance,
Kyove
Hi Guys,
I've just finish to clean a transfer belt of a TASKalfa 406ci.
Machine has 23600 copies (23000 bw and 600 color) and 3 months of life.
Problem was toner smudges (not every print) on...
Hi Patrick,
It's a SMB problem. Your TASKalfa 420i (a rock, like it too much) and your Windows 10 PC doesn't speak the same language, or better, the same SMB version.
Starting from version 1709...
Hi Guys,
I have problems with a M6030cdn. Here is a status report.
Laser seems to write the correct image but.. i don't know. Developer problem? Transfer problem?
Or maybe an engine board?
...
Today I changed WT Pipe Assy on a TASKalfa 2550ci (which had the same component of 2551ci).
I took a photo so you can see the older version of pipe: stopper is missing.
Anyone knows the code?
Hi Guys,
We all know the problem in TASKalfa 2551ci (TA 2550ci, FS-C8520MFP too) with the waste toner pipe assembly.
When I run into this problem usually I order a new WT Pipe like suggested in...