Search:

Just a general inquiry about what a technician with 40 years experience working on Ricoh production equipment makes. I realize it probably varies in different parts of the country...(asking for a...

We have 2 brand new installs of IM 2500's neither machine is recognizing the SR 3250 internal finishers or punch unit 3070's that are installed. diagnostic page print out shows no firmware for...

Thank You Subaro, I ended up removing the cleaners and the drive worms disconnecting cn 26 on the engine board and thoroughly cleaning laser glasses. I know I will be in there cleaning them manually...

Unit keeps throwing SC 271 codes (laser cleaner) I am able to clear by manually lifting up laser cleaner drive worms and jostling cleaners a bit, This time I hit the worms with a bit of G grease....

Just got back to this machine...Replaced transfer belt and blade and set all voltages to the paper chart specs included with belt. No go! still jams and now output is very light in areas. Lucky...

Just curious if anybody else has experienced this code on this model. Have seen it on 2 different fairly new machines in the past month. Was able to fix the issue on both by reconnecting the scanner...

First time seeing this particular machine but have been servicing them for years. PCU bound up due to recycle tube shutter mistakenly left closed (I didn't do it!) lol...anyway, replaced lower drum...

I don't have access to direct pricing through my company today, I wasn't really even looking for exact numbers just maybe a ballpark figure or advice from experienced tech's that have had this issue....

Does anybody know the cost of ordering the transfer release motor housing vs. just replacing the entire conveying assy'? Not looking forward to putting that mess back together but cost could be a...

Looking for some input from the all the other Ricoh toner monkeys :cool: out there. We just inherited several hundred more machines to service (lucky us), they have been poorly maintained and all are...

Replaced BCU and ribbon cables, also BCU eeprom (Nvram). Working with Hotline now, case has been escalated. Now shows all 4 cartridges not set, but on occasion will register Yellow...They got a...

Machine indicates Black and Cyan not set, have tried new cartridges, cleaned cartridge contacts, Replaced Black and Cyan set sensor boards. Ricoh recommends replacing BCU board and the ribbon cable...

Thanks Guys I had already lubed up the units with setting powder and cheated doors to see what motors and rollers are in action when this occurs. The strangest part about it is that it only occurs...

I have an 8310 that makes a high pitch squeak noise that is intermittent. The noise is originating from the paper transfer roller area, it starts when the roller raises to contact the oppose roller...

In The new Tom and Jerry Movie at 16:55 mark they feature what appears to be a Ricoh MP2851 (or similar model). The machine is not equipped with a finisher so instead of showing a series of copies...

This post is really just concerning The Plockmatic 350 trimmer knife removal, Does anyone know if it is normal for the lower blade to have a slightly beveled edge where it it meets the upper blade at...

This unit is attached to an 8100 and the problem is an intermittent j372 code as the paper curls over on itself as it enters the ringbinder portion of the unit right after the punch action causing...

[QUOTE=slimslob;542617]First lets sort a few things out. The BF5010 is an attachment to the BK5010. Second, the error code BF-212 does not exist. Are you talking about error code BF-012 on the folder...

Have a BF 5010 that throws a "bf 212" service code which indicates the roller motor is stalling. I can observe the roller motor and pressure roller leave home and see the unit stall right at the...

What parts are you interested in? I can compile a list for you, Have parts for registration rebuild, duplex parts, ADf, Drive system, many parts that are prone to failure, finisher and lct items...

have seen those coils break once or twice but was more of an issue with the old 2090 model...is that drive train turning or bound up?

Is that what it actually reads on display? Don't think I have ever seen that exact warning, If machine has a lot of miles on it the sensor is probably dirty (as stated in previous post) undock...

http://mlm-s2-p.mlstatic.com/chip-para-xerox-copycentre-c20-workcentre-m20-y-4118-2627-MLM2706901037_052012-O.jpgCopycentere C20

Need the service manual for this little relic...Thank's

Need left side cover over top of DP 410 feed unit also be great if someone has a used drum unit that still makes a decent copy...