Search:

Type: Posts; User: Printerdude

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: HP Laserjet II / Apple Laserwriter II Help

    HP stop selling these rollers in the 90's.

    You might find someone selling a new old stock complete roller assembly part # RG1-0931-060. Just make sure it's not a aftermarket product because they...
  2. [Jamming] Re: HP MFP M479fdn jamming when printing on labels

    Did you set the paper size as a custom size 174mm x 306mm? Wrong paper size will throw off the paper registration and cause paper jams.

    Using these type of labels are not made for this type of...
  3. Re: HP Laserjet II / Apple Laserwriter II Help

    The paper pickup roller you replace is bad or installed wrong.
    Only a Genuine HP/Canon rollers works best, aftermarket rollers are crap.
  4. Replies
    3
    Views
    649

    [Jamming] Re: LaserJet Enterprise M605 Misfeeding

    Glad you were able to fix the problem. Most likely it was the solenoid causing the multiple feed issue.
    Solenoid staying on position due to sticky foam pad. If you still have the old solenoid,...
  5. Replies
    1
    Views
    400

    Re: LJ 4015, no power...

    Yes, there is a fuse. If fuse is good, then replace power supply.
  6. Replies
    8
    Views
    1,722

    [Misc] Re: M608 Stuck on Initializing

    Not much left after replacing the HVPS. When it does work, can you print out an error log report? Is there also a wireless module attach? Running out of ideas.
  7. Replies
    8
    Views
    1,722

    [Misc] Re: M608 Stuck on Initializing

    Since replacing components associated with the formatter and replacing the fuser assembly didn't work, how about replacing the scanner assembly?
  8. Replies
    3
    Views
    2,712

    [Dead] Re: HP LJ M604 No Power

    Agree, check the fuses on the power supply board. If fuses are good, then replace the power supply board. Also, doubt the formatter board is bad.
  9. Re: Laserjet cp3525: Magenta become light from the front side of the machine

    Take a look inside the magenta toner slot, something might be dislodged creating a large gap between the drum and transfer belt. Did you try stopping the machine during a print to see if toner is on...
  10. Replies
    8
    Views
    1,900

    Re: HP Color LJ 3600 faint blacks

    As Lance stated, sometimes the clips from the contact-holder assembly breaks and won't hold the HV board flush with the contact-holder assembly, will cause no voltage to toner cartridges. I know you...
  11. Replies
    22
    Views
    8,508

    Re: HP M525 Close top feeder cover

    Replace the harness cables. These cables break because of all the open and closing of the ADF lid. One of the lead in the ribbon harness is most likely broken. Had similar problems with ADF issues on...
  12. Thread: P2015

    by Printerdude
    Replies
    1
    Views
    1,158

    Re: P2015

    I see no problem swapping a non network formatter board for this printer.
    Make sure to match duplex formatter to duplex printer and non duplex formatter to non duplex printers.
    It still might work...
  13. Replies
    11
    Views
    5,670

    Re: Leading edge folded on M712

    Did you check the ream of paper in tray 2 for folded paper. Have seen paper either crease or folded right out it the package. Also, check the tray paper length/width guide is set correctly.
  14. Replies
    4
    Views
    10,232

    Re: Scanner error 13, MFP 477

    Have you reattach the cables to the scanner itself?
    Does the scanner assembly move freely?
  15. Replies
    4
    Views
    10,232

    Re: Scanner error 13, MFP 477

    Are you sure the display is showing scanner error 13??? or are you guessing a error 13 is scanner issue?
    Error 13 are usually related to paper jams.
    Error 30 are related to scanner errors.
    What is...
  16. Replies
    12
    Views
    1,882

    [CQ] Re: Faded print on HP Color 4600

    Forgot, thanks. Edited previous post.
  17. Replies
    12
    Views
    1,882

    [CQ] Re: Faded print on HP Color 4600

    Since printing issue is happening with two different computers, let's look at the printer itself.
    Make sure economode is off.
    Did you do a cold or NVRAM reset?
    Did you swap the black cartridge to...
  18. Replies
    9
    Views
    2,420

    Re: HP M632, image shift.

    Don't rely to much on your support guys.

    Wild Bill is in the right neighborhood. I know there should be an adjustment for each tray, why remove this setting on a newer printer?

    This is what...
  19. Replies
    9
    Views
    1,304

    Re: LJ 4250 ghosting

    Copyman,

    By any chance do you still have the original packaging the fuser came in and provide a picture of the packaging and the fuser assembly with the serial number?
    May be able to help you to...
  20. Re: HP LaserJet M608 Not seeing Tray 2 "Tray 2 overfilled or roller issue"

    Great tip! Had other HP models with the paper size sensor assembly dislodged.
  21. Re: HP LaserJet M608 Not seeing Tray 2 "Tray 2 overfilled or roller issue"

    Did someone mentioned right paper guide? I read left paper guide.
  22. Replies
    9
    Views
    4,837

    [Misc] Re: HP P4515 Formatter

    My mistake, the engine cycles count can be modified. But try this.

    Print out the usage page from the Information menu, the usage page will have list of impression made. If you think the engine...
  23. Replies
    9
    Views
    4,837

    [Misc] Re: HP P4515 Formatter

    No! You can't reset the engine cycles counter on this model.
    If you're planning on swapping out the formatter with you old machine, print out the configuration page with the page count and network...
  24. Replies
    9
    Views
    1,976

    Re: Hp M451n color

    I see there isn't a lot of parts available for this model, mostly major assemblies. Glad it worked out for you.
  25. Replies
    9
    Views
    3,695

    Re: M651 Error 50.2F

    Do you have the original fuser? I you do, put it in and leave it in to see if the problem persist. This really sound like a refurb fuser.
Results 1 to 25 of 128
Page 1 of 6 1 2 3 4