Search:

Would anyone here have access to the EFI FIB image for Xerox EFI Fiery EX-C C8100?

thanks

I'm looking for a EFI Fiery RIP/print server for a Xerox Altalink C8170 - EX-C C8100

Thanks
Markus

I removed the dispenser unit and cyan was indeed completely backed up and compacted. I managed to clean it out & everything is moving freely again.

thank you!

Thank you. I'll take the machine apart today and see how it goes.

My machine started giving a toner empty on cyan... New cartridge (I rotated three cartridges), same error, cleaned contacts, same error.
The machine also started making a mechanical/clicking noise,...

No - I'm a one-man print shop and fix my own devices as things come up. Yeah... the Pagewide is great when it works & I figured this is going to be somewhat involved.

hi all. Does anyone here have the service access code for an HP Pagewide 556? or any tips for further printhead cleaning besides what's in the menu options?
The machine prints streaks on one side,...

Yes, that did the trick – thank you very much!

I have a (new to me) Xerox 5890 with a booklet finisher and the energy saver is greyed out in the menu, no matter what setting I set it to.
Scheduled/intelligent makes no difference. The machine...

Thank you... No, that's not it. the waste toner container is only 1/3rd full and the rod is moving easily.
The sound is coming from the feed side, I wasn't sure how to describe it properly.
All...

hi all...
my 7545 started making this knocking noise, behind the B door, top right, towards the front of the machine.
I can actually feel it vibrating when I put my hand on there...
I see no...

hi all...
how would I adjust duplex printing on a Xerox 7545? front and back of the sheet are slightly offset, by about one millimeter each (the long way)
I am assuming there is a way of adjusting...

I took the whole thing off...

Problem solved! Thank you all for the valuable input!
The new transfer belt on the old unit works great & on the new IBT unit one of the thinner rollers seems...

Thank you for all the suggestions... This is a great learning experience.
NVM reset didn't do much of anything anything, nor did force registration.
I tried swapping the yellow drum to no avail,...

Yes & color registration is slightly off after running it... the yellow sticks out by a hair. I may just try a manual adjustment, although I have no idea how this works exactly.

hello all, I own a Xerox 7545 and I replaced the whole IBT unit after some other trouble with the machine.
Everything prints clean now, but I have a slight misregistration issue on the yellow & I...

never mind, I've figured it out... I simply needed to enter the drum serial number

Looks like I need a technician... Does anyone know someone in the NY Hudson Valley area?

I have purchased an inkless drum for a Riso MZ990 on ebay, the model number S-4714 is correct and the drum looks just like all the others I have...
I followed the included instructions to a T......

hi all –
I have recently purchased a Riso 990 MZ, and it turns out the paper supply tray/elevator gear (white plastic) sheared off on one side... where would I be able to get this part, and how hard...