Search:

would that be the same for usa as well..

was wondering the latest version of firmware for Kyocera 3501i.. I have combined firmware package V4.07. what is the latest?

HAVE A COPYSTAR 5501i THAT DISPLAYS " CHECK WASTE TONER"

I REPLACED THE BOTTLE TWICE, SWAPPED OUT THE WASTE TONER HOPPER ASSEMBLY THE WASTE TONER BOX HOLDER THE DRUM STILL SAYS CHECK WASTE TONER...

help is needed! I have a 1020 mfp with a sc400.. turn on the machine and machine initializes and pops sc 400. the code is not listed in manual. but does say 4xx is related to itb transfer so with...

looking for main charge assembly for cyan unit. can find oem part number. any one know part number?

yes I tried different fuses it was the thermostat to it out and smashed it against tble and worked.. hopefully itll last to a new one comes in. thank you for your response

Have error code 552-02

i replaced both thermistors. Wireharnass and the film assy twice with new lampps i reset it in 5810-01... I pulled the fuser and recycled went to 1106 to watch temp hangs...

I CAN USE A CLOUD OR FTP

We purchased 2 used machines. They came in flashng that thiers no animation data. Does anyone have the movie file i need? Thanks in advance

did you ever find it? if so can you send to me?

In the scanner screen there are scan settings on the left. In the edit tab of that screen there are reduce and enlarge settings. Once you set them to where you want, press program key to set as the...

Did you scrub the developer mag roller? Is it dirty? What is the meter on the machine?

Had something similar years ago. 3 techs and a trainer missed it. it was intermittent spots near lead edge. There is a tin foil type material on a vertical plate just before the fuser that is...

If the waste toner isn't full with message, you can clean the sensor with a rag. They are old school piso sensors.

2111 'c' (2111-3) adjustment is a coarse adjustment, you have to follow with 'a' (2111-1) fine adjustment. Had the same thing happen to me a couple weeks ago with calibration failing.

RAM from old board should be moved to the new board

There are 4 light sensors that look for paper in those feeders. I had an account that just used theirs for scanning and did it all day. The sensors look down at black felt patches in feeder. These...

Update firmware, some older firmware had issues coming out of energy saver and/or auto shutoff.

You can confirm by disabling auto shutoff on machine for a few days.

Looks like a good price, has anyone tried that vendor?

34709

Take a look at service bulletin 014, there are adjustments in there to slow down machine and adjust temps. However, the customer should be meeting you half way and using the machine as...

Thank you! I disassembled the toner motor gear box and cleaned it out. It was full of toner causing the errors which in turn caused the jamming. Still would like the manuals so I can service the...

Looking to get the manuals for this, new customer called with jamming and C2201 errors.
mark@copiersplusinc.com

exact match on spots on both sheets, check and clean cyan drum and/or transfer belt. If you aren't a tech call one.

D052 Series SP Mode Settings:
•
SP 1107 Start Fusing Temp. Adj. Modes - 1 / - 2 / - 5 / - 7 change to 195
•
SP 1902 - 2 Web Motor Operation Interval - Lower to 15
•
SP 1902 - 3 Web Motor...

Usually caused from flat spot in pressure roller, replace press roller with bearings, upper bearings too. Adjust web motor settings per bulletin 15, enable auto shut off if disabled so machine...