Check 08-4541 .. default should be 0 .. if not change it to 0
Type: Posts; User: hidius
Check 08-4541 .. default should be 0 .. if not change it to 0
remove the toner bottle and do sky shots untill it tells you to insert toner bottle. i know it works on the newer machines but dont know about these older ones. also usually if its overtoning the...
This has something to do with the way edge handles self sign certificates for security. The only way to get around it is to allow internet explorer mode under settings in edge, then connect to the...
Pull out each drum unit and check the charge roller or charge cleaning roller if its breaking apart or soiled then change that unit.
If you take out the drum and look at the charge grid. if its dirty in that spot where the white is then its a dev issue. when you replace the dev you have to clean the grid as well, or put in a new...
If your using chrome. try resetting it back to default. settings -> reset settings -> restore settings to their default values
Pull out the colour drums and check the charge and cleaning rollers
replace the toner filter behind the machine will reduce this issue. there was a tech article about this issue.
nope .. hence the different part numbers
make sure to set cds-ctl under service mode to the right country
I would say its the 2nd Transfer outer roller on the door side
black drum unit will be your issue. probably the cleaning foam roller disintergrating on the drum unit. take it out and have a look
plug the usb in
boot up to safe mode using the 1 and 3
select option 4 clear/format
select option 1 disk format
When clearing or executing format HDD, reloading the firmware is not...
usually with this error code especially if its showing multiple sub codes is to take out the whole drum/dev process unit and ITB unit. look inside towards the back you will see the 4 color hopper...
when you turn on the machine for the first time it will come with this error code. depends on which model you buy it will come with a registration key which you have to register on the canon lms...
have you replaced the primary charging assembly?
ps39 is the reverse sensor. sometimes the sensor arm will pop of its holder. the way to check and fix is to remove the delivery unit then you can access it from the top
DX series service mode:
1. in standby mode, press the "counter" key. this will bring up a number pad
2. press the "setting/registration" key
3. press number "2" key
4. press number "8" key
5....
if you put a different fixing unit into that machine and clear the error code does it work?
this error code needs to be cleared in service mode.
setting/registration > 2+8 > setting/registration > mode list > copier > functions > clear > err > press ok
restart the machine
if you followed the installion instructions you would of came across that step to move the pressure plate across
from my experience you cant pre-load these hard drive on a machine and swap it to another machine it wont work. if you swap hard drive you have to format and re-load the firmware to make it work
the menu doesnt show because there is something wrong with the reader unit. is there power to the reader unit? doese the light come on when you close the adf lid?
with the canons just leave them in sleep mode .. they will wake up every couple days to do a minor head clean and nozzle test
try cleaning the feed rollers. but sounds like a tray 1 paper pickup solenoid issue