Search:

The machine will not register paper sizes either thru adf or glass. You have to select paper size before pushing start. Everything else works, and it did not lose any users or other functions.
I...

Any body else getting over run with E301 and FA14 errors on this series? Got a good solution?

Someone has a job stuck in the print que. You will have to have everyone check their que. It will not be listed in the job history on the C360.

You can use the xds driver and turn off print preview. Only way we fixed ours.

Try using 10 digit numbers. area code plus number, even for local calls. VOIP requires 10 digit.

I have a c652 that the blue light flashes when the start button is pushed but it never spits out a piece of paper. Customer said he changed waste toner and then this started. All settings look ok...

OK, I think the error code is a fluke. The first copy of the function list upon wake up enters the finisher, the second copy is at the top of the right side just going into machine. Should it be...

A ton of E010 and E5A0. Replaced exit sensor (top one on left door), and cleaned all other sensors. The stapler unit seems to always be in the middle of the finisher, even though not calling for...

After downloading the files and unzipping, open the folder and copy just the FW0002 part to your root on the usb stick. also use one stick per file. See bulletin 10072

Every time this unit wakes up it jams on the first copy out. Clear the jam, it runs all day. I notice the stapler is in the middle of finisher even though it was not supposed to staple. Just a...

For 8 series machines you must create a folder in the root called FW0002 and put firmware in it. For 7 series it is FW0001. Must be FAT32 also. And these machines are picky about USB sticks, and...

I have a 1 inch shadow on the front side and it does move. Sometimes it is as long as the paper, sometimes just a couple inches long. We have replaced drum, developer and unit, transfer unit, 2nd...

I have a 5540c with a MJ1103 that gives me a EA40 error.
All doors are closed and it will not reset. Have to shut down machine to clear. ANY IDEAS?

Keep getting this error. Changed 2nd transfer roller and cleaning roller and reset but this keeps coming back. Any ideas?

That is true, that is why the full page is on top.

Sometimes they do not do this weird thing, it is that when the customer least expects it is when it does it.

I have All my 203's doing the same thing. I have a pre-printed picture on the right side of the paper. Install paper face up in tray. I have one full page original on top and 1/2 page on second...

Try pulling page memory and reseating it. This can fix several of these type of problems.

I've got an 855 that slows way down when running. It does not do it all the time, but if you run 2sided that staples and a run of 50 or so, it can slow down to a crawl during the run.
Anyone ever...

As stated above, I have replaced the finisher board and the punch board, as well as the whole punch unit with a new board. Still getting this error.

ANY OTHER ideas?

I have a 855 with a MJ-1027 with a MJ-6003N hole punch attached. It is giving the CB-80 error code. I've replaced the whole unit...and both boards on the units, and tried the adjustments.

It...

Checked that and it is not the problem.
Any other ideas?

Have one giving a tray has reached capacity message after every copy. Tray goes up, paper comes out, 3finger lever stays out tray goes down and message appears. To clear just touch the lever and it...

Common with the black drum on these. Replace black EPU reset counters and run calibration.
It is common really on all the units, especially if they do not have the grooved mag roller.

Anyone have a GD1250.
I need one for a EStudio 205.
PM me here.

I have a customer that wants to scan to file to 2 computers. No server, just a LAN with @ 7 computers and only want to scan to 2 of them. I've set up scan to server and scan to E-Mail before on...