So instead we should continue on with tax and spend like a drunk sailor?
We should continue with 8+% percent inflation? And high gas prices despite depleting our strategic petroleum reserve? ...
Type: Posts; User: SkipL
So instead we should continue on with tax and spend like a drunk sailor?
We should continue with 8+% percent inflation? And high gas prices despite depleting our strategic petroleum reserve? ...
FactCheck.org said your statement was false.
Even the liberal Washington Post gave the statement FOUR PINOCCHIO's and says that it is poltical trope. But the same B.S. is spewed EVERY election...
This lie is spread every single election cycle. Straight out of the Democrat playbook. Think about it. Why have the cuts never materialized? Political suicide if it was actually attempted. ...
Latest call on a bizhub 223 for jams -
Feeds paper fine out of tray two and with proper registration. Using tray one the paper stops 1/8 inch beyond the feed/reverse rollers and goes no further...
Just a long shot. Does anyone have a Sharp AR-507 drum cleaning blade Part # UCLEZ0149FCZZ
Machine has 3,100 copies but is 19 years old!
Can not locate at any vendor due to age.
Thanks...
SAVIN 840 - Streaks and lines that you could never get rid of easily. Also, customers would move them close to a wall and the scanner would strike the wall spilling the LTL solution everywhere...
Amen on that one. Sometimes I forget why I
am at the account.
Let me start by stating I am a L-O-N-G Time Katun customer since 1982.
I have been with them through all their legal battles and tribulations (you can do a search of the previous major legal...
Just purchased a very, very low copy off-lease Bizhub 363 that has a severe flat spot on the fuser pressure roller. Has anyone found a source for the pressure roller? After market heat rollers are...
Turns out the transfer belt was fine and the clutch was fine. Curiosity go the better of me and I pulled it all down in the back to get to the photo-interrupt belt retraction sensor. Turns out that...
Yes, I clear the code by opening/closing the front door. Any idea of time involved?
Need some info and yes I do have tech manual. I got this error code C2152 immediately following replacement of a laser print head but I can't say it's related. Rechecked all plugs, wires,...
Savin 840! Streaks & lines, streaks & lines - did I mention streaks and lines?
Hello. Long term independent copy tech here - Est. 1983. Have a bizhub 363 that displays "no animation guide available - See Admin". I have been told I need to download and install a file to...
This has been happening to me as well. I have tried to post six times with no success. It says I am registered and I can log in. HELP!!
Any help would be appreciated. I need to reinstall the animation file for a Konica-Minolta Bizhub 363. Copier arrived from the wholesaler and up power up it displays the warning message "animation...
The copier displays "no animation available" warning on the op panel. Can anyone share or provide me with the downloadable file to install the animation back into this BizHub 363. I have the...
Good day,
I need a download copy of what I believe is a Bizhub 363 "movie file" (.tar)? to correct the "No animation guide available - See administrator" warning message. I do not have access...
Old timer, started in 1981. Started with Savin LTT, Savin/Nashua 220, Escofot e-stat, etc. Worked for three dealers in a row that went "belly-up". Started my own business in 1984. Now 63 and...
Good day,
I just received three BizHub 363's from a used wholesale vendor. One of these displays a warning "No animation guide data available" message. Is this a firmware update, a corrupt hard...
I just purchased a used BizHub 363 for resale and it displays a warning "no animation guide available ... contact administrator".. Is this a simple firmware update and if so does anyone have the...
PS -
Both the transfer and A/C separation wires are the same. Check the corona end blocks as quite often the blocks short resulting in no image.
I believe you mean a Minolta (Not Konica-Minolta) EP 1085 Analog machine. If so, believe it or not I still have three of these units in the field and still have some parts. I believe the corona...