Thank You MVPunisher,
That sounds like a great idea and I will give it a try, that is exactly what I was looking for. As my post read “has anyone seen this before” NOT I will tell you how it is...
Type: Posts; User: garrycmsi
Thank You MVPunisher,
That sounds like a great idea and I will give it a try, that is exactly what I was looking for. As my post read “has anyone seen this before” NOT I will tell you how it is...
I am wondering if anyone has seen this before it seems to fold the leading edge before it turns over to exit. one of the mylar guides near the front of the finisher is bent up but not sure it is the...
I would but you know the story nonprofit no money.
Thanks Phil B, it only has 109,000 copies.yes it is fused, 20# bond, no humidity.seems to have electrical interference like a corona arch or some high voltage leak.
Thanks Everybody
wow! Phil B is somebody having a bad day? the copies have a distinct grainy look like fine wood fibers most notably in large solids.then randomly it will click go off and come back on by itself...
hello techs,
I have a old cs2530 doing weird things I have never seen before on this mode, first the copy quality is grainy and secondly it will just turn off and back on by itself ? I am wondering...
Thank You copier addict seems logical to me as well I just wanted some confirmation because I am a kyocera tech not so familiar with bizhubs. I just happen to have a customer that has one of each I...
Hello,
I have a customer that replaced the yellow IU before counter maxed out now machine just says warming up ready to scan.it will not move past this state if I put the old IU back in then the...
Thank You all for your input I have a couple questions to ask. 1. will the bh423 transfer roller fit directly or is there some modifications 2. I imagine the mag roller needs to be removed to replace...
Hello all. I have a bh362 put in brand new drum and dev unit after about 7000 prints the rear end of drum and seals on the rear of the dev were all chewed up?
any help or ideas would be great.
...
I have ira c5035 error code E000027-0400 developer drive coupler is good "new style" I also got a e000025-120 as i was working on this any ideas?
Thank You
Thanks for the input it is off the feed way and i believe it has a registration motor
I have a canon ir2200 and the registration is off by about 1.5 inches usually in the morning from both paper trays. it usually happens first thing in the morning but not every time? any ideas would...
I have a canon ir3530 that has a high pitched squeal for about 3-4 seconds after paper exits. seems to be coming from in and around right door, I have checked the fans and the laser unit. any and all...
I have a bizhub362/df620 that does not pull from document tray reliably. I have cleaned and lubed feed clutches,cleaned rollers still will not always pull.
any ideas?
Thank You
please help me I have error code 012-0304 my service manual only shows the drum drum rotation sensors in section 4 as an overview and no removal details where are these sensors located any help would...
please help me I have error code 012-0304 my service manual only shows drum rotation sensors in section 4 as an overview location and no removal details where are these sensors located. any help...
thanks for the ideas i checked transfer unit rollers all are fine.yellow developer appears to be under toned, there is also yellow toner residue on transfer belt ?
customer called and said color is off when i went there i ran sim 64-1 and found no yellow. replaced the drum and yellow came back customer called two days later with same thing again any ideas
i have cleaned the optics and lamps,code will come back after several lamp check cycles ant ideas?
thank you hans,
developer unit turns freely, motor will turn every so often and makes a buzzing sound when it decides to turn
developer motor wont always start i can get it to spin by manually turning it. is it a bad motor? or is it like some kyoceras that give motor error codes when interlock switches fail