Search:

Could the cause of these streaks be the transfer belt? If so, do you have the product number to change it?
Thanks again

Good evening everyone
I have a Canon MF742Cdw which releases vertical black stripes when printing and copying.

20231123-212618 hosted at ImgBB — ImgBB

The printer has approximately 20,000...

New hopper fitted Once the printer has booted, do I need to launch any SP?
Do I have to reinitialize the PDCU?
If I look at the black PCDU, the toner almost fills the entire development group,...

Good evening Thank you all for the support We picked up the printer and here is the defect. How was this possible? Once I replace the black toner hopper do I need to throw any SP? Do I have to do any...

what i don't understand why that blue bands. The problem was with the black toner.
Can I try to reinitialize the pcdu in spmode? I noticed that inside the pdcu, in its final hole, there is a large...

Good morning everyone.
I have a problem with a Ricoh 2004. Here is the following:
On this ricoh the PCDU was changed 1 month ago. The pcdu has been changed completely. Drum plus Development...

Good evening. I understand your disappointment but guys, I'm a novice technician, and this customer is very far from me.
I will proceed to remove the fuser, then I have to change the 3 gears right?...

good evening
I was able to trace the problem (Simulating the closed door and pressing the two side sensors)
As in the image below the problem is in this area.This anomalous noise comes from here....

Good evening everyone.
I have a 2004 mp with this strange defect.
There is a strange noise coming from the paper exit.
The machine has about 45,000 copies

Ricoh Problem Mp 2004 - YouTube

It...

Image

Hp-4015 — ImgBB

Was the imaging unit not along with the toner on this model?

Good evening everyone.
I have an HP 4015 printer that prints like this.
Could it be the fuser?
Should I change it?
51440

I had a way with this model, and this kind of problem. I have many customers with this type of printer, and I will soon change them. This model MPC305 is cursed !!!!

Good morning
I have a problem with a Ricoh 2501 SP (Black Model - Black Only Print).
All prints and copies that come out are distorted by 2/3 mm.
What can I do to correct this error?
I can attach...

Good morning
I have a problem with a Ricoh 2501 SP (Black Model - Black Only Print).
All prints and copies that come out are distorted by 2/3 mm.
What can I do to correct this error?
I can attach...

Hi guys.
Precise that all the assembled pieces are Ricoh Originali.
Provided by Ricoh, we are their partner.
These MPC305 printers are cursed, now by error 524, the transport engine runs badly
...

Why did the problem occur a month after changing the PCDU as suggested by Ricoh technical support?
The strange thing is that if I print the test pattern - checker flag pattern with black e yellow I...

Firmware installed:



Nome modulo
Versione
Part number


System/Copy

Thanks for your answer.
The fuser is brand new as it is possible that still continues to make wrinkles? And then it does not always.
Is it my impression or is the model mpc305 a model with many...

Good evening

I have an MPC305 with various problems

The printer gave this flaw

See image attached

- On some sheets came out an abnormal fold
- If you printed in color, it printed an...

Good evening
I have a Ricoh 5002 which has horizontal lines at 2mm from the sheet being copied and scanned. The printer has the new pcu, so I exclude both.
The problem in the prints does not occur....

Good morning
One of my customers has a Ricoh MPC305 and has this problem with normal paper. Basically the sheet is all explained with a line in the middle. He prints a lot on the card, the problem...

Good evening
I have a Ricoh Mp201Spf to which the CPU unit must be changed.
I have two questions:
1) I ordered the whole PCU block, I have to add the developer ?, or is it already included in the...

I did not unmount anything in the laser unit, I just removed it to clean it, removed the whole block. The manual says to unscrew those 3 screws in front, I just did this. I have not removed cards,...

Thread located here

http://www.copytechnet.com/forums/ricoh/128116-sc-220-after-clean-new-post.html

I was wrong to post it, every suggestion is well accepted

Thank you

I have not used any vacuum cleaners. I removed the whole part of the laser block (was full of toner), cleaned by hand, and remittance and I have this error. I have not touched cables or wiring. The...