Good Day. I am interested, where can I sent my resume
Type: Posts; User: Alexkyocera
Good Day. I am interested, where can I sent my resume
Haven't seen the picture??? Oh I got it open Ive had this issue before and I think I know how to fix it
It's the Paper sensor. Just bent them. If not it's the gear on the cassette needs updating based on new release. DM me.
Check retard roller
Need that, changed all major parts, only thing left to try is replacing the High Voltage board
thanks for the feed back
The below are the best probably causes. Im working okay pin pointing where the grinding sound starts from. I will find out
unlevel waste path.
customers not shaking toner properly
poor...
Yep we can resolve but whats the cause, and what can be done to prevent it, thats what im trying to find
Replace Drum, DV, Main Charge, interchange Laser unit, transfer belt. Nothing works anyone had the same problem??
What if the issue reoccur??? Anyone found the root cause of this. These machines are making loud grinding noise, we need to come together and find the root cause.
yep
Any possible fix??? We been replacing gears and waste toner assy on the drive unit and the shaft and pin. Whats the root cause for the toner to back up, im still trying to find a fix
Bro I feel your pain same exact thing happened to me after replacement, its crazy, I had to reconnect all connectors and U906 and removed and reinstall the shaft that activate the sensor for the main...
It also gives a front cover open message which takes a while to go away, youll have to removed the shaft that activates the sensor and bent it back in place U906 to get it to work. they need to make...
Instant message me and we'll talk
private message me
My fix was to bent the paper sensor. When you tilt the machine to look under, there should be a white sensor that detects the paper, bent that sensor in the downward position and it resolves the...
check tray one paper sensor and bent in direction of the paper.
The machine surpass 350k was at the customer for over 4 years. Going to send you event log
was a fix found???? Having the same issue
Issue was resolved. Customer IT initialized the machine. Had to run firmware and redo setup procedure. Thx guys
We have ordered and installed a new C754e, however after about 3 weeks the machine starts to develop lines whenever color documents are being copied. The machine prints perfect and copies black and...
im going to swap the scanner PCB and see what happens, after I will have to try and contact kyocera
this code occurs after swapping out parts from one 2551ci to another
Two machine was present parts were switched around. one machie working okay now but the other had a 6600 error code but now displays C9540.