Fairly new device, less than 6 months old, first call on the machine. no errors displayed because the screen never turns on. not sure of the meter as, once again, it never turns on. Fans dont come on...
Type: Posts; User: robscopyr
Fairly new device, less than 6 months old, first call on the machine. no errors displayed because the screen never turns on. not sure of the meter as, once again, it never turns on. Fans dont come on...
I have a BP70M31 that only has a blinking blue light, and the power button on the op panel does nothing, Tried replacing the op panel and the MFP PWB with no change. Anyone faced this issue before?
Black cat is right, unplug the network, if the error goes away clear the print que and re-test. I have never seen it be the HDD problem personally, I work in a hospital and I see this error every...
We never should have closed it in the first place, this is such an over-hyped media driven pile of excrement.
Has anyone had this error, I have one copier that has a lot of this jam code. There is a bulletin but when I downloaded it the info was wrong completely-doesn't match the description. Anyhow. there...
[QUOTE=gwoodslive;740140]hello all,
i have a 5500 that is jamming in tray 1.
the paper is getting pinched between the pulley and separation rollers and getting pulled down into the housing for the...
I left the copier industry just 45 days ago. I now work on ATM and Smart Safes, so far it is the best career decision I've made in a LONG time. I worked in the copier world for over 25 years, and...
check the spring contacts for the transfer belt-pull the transfer belt and look along the back side of the machine, there are 4 wire contacts that touch the transfer belt. I have seen these get...
sounds like the scanner is not getting a signal from the network cable
We are looking for a technician in the L.A. area. Connectivity experience is a plus. Knowledge of Kyocera and Riso is also a plus. Good company, good pay. Must have reliable transportation and live...
I was a tech for over 25 years, now I am an Operations Manager
it is in the system setting, under adjustments. I do not have one in front of me to give you the exact procedures, but if you get into the system menu (button is on the control panel) and go thru the...
That's where I would start. The transfer roller is a fairly inexpensive part and part of the PM kit.
I wish you luck working for the BCS Family. Glad you found the site.
Jobseekers BEWARE!!
Why does asparagas make your pee stink?
One of my favorite things to do when this situation presents itself is to reach into my tool bag, pull out my spare screw container and say something like " Well, I got it working again *sigh* but...
I just cannot recommend that anyone go work at that company, it is just my personal opinion, take it or not.
Mtech, do you know the part # for the drawer itself? and no Paul... I dont want to buy the manual for one part.
I have my hopes up that the American people will say enough to the Obamanites and the way that the economy has continued to decline. Don't get me wrong, I still do not believe that a TRUE leader has...
Try cleaning the main charge roller with Windex (glass cleaner).
I am not sure if my question has been covered yet, and I could not care less about my Karma or any colored card, and I got bored after a few pages of the string. What I want to know is: Does this...
If they were not storing or using the hard drive for the prints you are S.O.L.. Those hard drives act as RAM not ROM unless specified to save a copy to the HDD.
From the look of your profile you...