Yes i can do it? or yes the tech does it?
Type: Posts; User: xcopy
Yes i can do it? or yes the tech does it?
Yes there are alot of good machines out there. But the best ever was the Xerox Docutech.
http://www.youtube.com/watch?v=fspLKEm2ZWQ Up to 180 pages a minute, in production for 25 years, full glue...
Hi my fuser is leaving roller marks on the page. Is it possible for me to change it, or is this technical?
Thanks
Can i change the drums or does the technician do it?
Are they tiny specks all in a row?
I have workrd on them and think you are way of the mark. The best copier is the Xerox 6180 or 6135 docutech. You tube
http://www.youtube.com/watch?v=MoaYmakN5Cc.
Have a look. The machine has been...
I heard it was over engineered. I mean why have two fuser units thats twice the work and twice the cost.
please help! I would like to improve this business.
Should copier technicians be able to do network or it service calls.
I have taken the copier of the network and plugged in my laptop and tried to print test page and the data light flashes with laptop to.
Do i need to replace print controlle?
I have a machine that has a 17h, which is a rotation rack failure.
Has anyone seen this before?
I would like to know before i drive one hour out there.
cheers
Line going from front to back. Line is closer to trail edge.
Only happens on envelopes and compliment slips.
Any Ideas
Just changed k dev and this error has come up, any ideas?
I have replaced 2nd btr and 2nd Btr drive. I have also cleaned the transfer belt drive roller. It improved a little but always comes back with shrinking image. The fault has been looked at by all the...
The colours are not registering on top of each other, and the image is shrinking on the page it looks like the 2nd BTR is slowing the paper down.
The thicker the stock the worse it is. Some times...
No code like that in the manual,open and close the front door to clear.
The units are in one piece. The only way to do it is to send a RMA(return Autority) to konica and replace it under warrenty.
Thanks for the reply, it also says install all 4 toner cartridges, as well as all 4 image units. The machine has the origonal image units in it. How did you know what laser unit was faulty.
When you turn it on it shows a picture of the image units and it says install them. But they are installed. Under consumables it says the image units and transferbelt and fuser is brand new. Then you...
open a new ream of paper and try it. otherwise change fuser.
Yes it is that senor, we have just ordered another one but, There is no pot on the board to tune it. Am i missing something?
Replaced sensor 1 and feed rollers. Jams from both trays, and stops before entering main machine.
It makes a loud gear or drive belt skipping noise when it feeds from the right deck over to the left. All the clutches have holders and i have swopped clutches arround as they are the same ones. But...
Thanks Guys, Yes it is our machine we have just traded them in. we need a copy out to send it to the wholesaler so he can send it to Thai Land, fiji, Baghdad or USA, all the places that dont have any...
I have two machines i need copies out of them. They have operater codes that stop anyone that dosen't have a code from using machine. How do i turn it off.