Fixed, problem with the software, not the printer.
Type: Posts; User: w0179651
Fixed, problem with the software, not the printer.
The bypass will not print on custom heavy stock, but it will print on plain and LTR heavy stock. Both full auto gradations for plain and heavy stock work great.Can't figure this out.
No error...
This worked great!
Thanks teckat! As always, you are a life saver :D
So, I used Autogradation and the color settings to somewhat get the colors back to normal. Still not perfect. When print black text, its good, when printing black in pictures, its dark green. Reds...
I have been, how many times should I do it. I've been changing the PASCAL settings too.
After replacing the yellow drum, the cyan turned more green and magenta tuned more orange. I did a p-print and re set the RCON and DC-Con. Still the same issue. Please see before pg 10 and after pg...
Never mind, the p-print had IMG-CONT at 3, but the machine need 0.
....
So, now it will copy, but won't print by USB any more. The p-print has IMG-CONT @ 3
There is no Fiery, but there is...
An IRC4080 is not printing. We have set the paper type, cleared the Reg-Clr, DC-CON, R-CON, and re-entered the p-print values. There are no attachment units. It will not copy, print, do any...
This IR C4080 will print on heave stock perfect on the first print, if you print 5 copies, the last 4 have a ghosting problem (please see picture). Also, the print is clean when you send 1 print each...
That was quick, I found it. [Function Settings] → [Common Settings] → [Tray Destination]
Is it possible for heavy weight MP prints to exit from the fuser area?
30094
The same problem is happening on a IR C4080. It is using the Canon Generic PCL6 Driver. The 1/6" option is not available under advanced options. The driver is the most recent PCL6 driver. Any...
As always, thanks for saving the day teckat :) . [facepalm] didn't see the pdf. [double facepalm] didn't know there were two PCBs with dip switches.
Thanks for the instructions. The "Saddle Stitch Position Adjustment" only shifts the fold +/- 2mm on the page; however, the staple is consistently 1/8" from the fold. Also, the "Saddle Stitcher...
Are there alignment instruction for the saddle finisher (saddle staple position) for the W2? The staples are constantly an 1/8" from the fold.
Does this pdf document apply to the IR C4080? The saddle stitcher instructions have no effect, while stacker alignment does.
Opps, yes, that is too low. 101 is 157,000
Thanks for the advice! However; the problem has corrected itself. The yellow is now perfect :) Some important background information: the machine had been in storage for 9 months. Has only 7000...
Yes, all toner and drum products are OEM. The K and M drums were recently replaced, their life is at 3 and 5 respectively. C is high at 183, and Y is higher at 252.
I have performed all the auto...
Hello:
This Canon iR C4080's Yellow (Y) is too dark (the Cyan (C) is off too). Please see attached pdf. What adjustments should be made?
29972
Thanks
I have fixed this error on the Canon iR C4080.
Error Code 000007-0211 means the lower fuser belt is not centered and to the left.
Error Code 000007-0201 means the lower fuser belt is not...
Thank you for all the advice. The print is now clean. To solve this, the blade was cleaned again, and bent/flexed (just by hand) towards the belt for better contact.
I cleaned the blade, and transfer belt and received 1 good print. Now it's back to the same problem. Any suggestions?
Hello:
This Canon IR C4080's transfer belt is constantly coated with yellowish toner. Attached is the the calibration tests. What is the problem here.
29952
Best Regards