Damp paper.
The reason the second side looks better is because the paper has already gone through the fuser unit.
Try fresh paper out the box that isn't sitting in the cassette.
Type: Posts; User: duwaynebrooks
Damp paper.
The reason the second side looks better is because the paper has already gone through the fuser unit.
Try fresh paper out the box that isn't sitting in the cassette.
Blow out the sensors.
Then do a sensor reset.
Check bushings and gear in duplex unit. Slack bushings here cause that jam.
Check milars.
Take out cassettes and watch the paper go through the unit to see what is causing the jam.
Let us...
Send me your email address
Good day
I have 5 C-EXV 41 colour drums for sale.
All five for £700 including delivery in London
07824497062
Good day all.
I have 3 sets of Canon T01 toners for sale.
£650 to deliver in London.
07824497062
Have you tried Katun Online Catalogue - Login
Hi,
Check the switch FM3-4592-000
Make sure its closed when the main unit is pushed in.
Good day,
Anyone in the UK looking to sell a Canon iP700, 750, 800 ,850 ?
Please get in touch
Thanks
If you have any CEXV 44 I will have them
Good day all.
I am looking for a fiery for the Canon Image Press C850
Can you help.
Please let me know.
Thank you.
I have two Canon 22XX range copiers scrapping.
Free to collect if anyone interested.
DB
Dear all,
I am looking for Canon Image Press 600/700 to buy for a client.
In reasonably good condition would be nice.
Look forward to your replies.
Thanks
Dear all,
Good day to you.
Does anyone have the part numbers for the 2 small gears on the rear of the upper fixing unit.
The parts catalogue I have only has the two front gears of the unit....
QUOTE=zoraldinho;741742]I believe they are in the database. Did you noticed how many websites have to offer these gears. Usually when Canon update the spare part does not change the part number, but...
A client has broken the gears on the toner hopper unit.
Figure 620
17_FU8-0907-000
16_FU8-0906-000
Neither part recognised on Canon database.
Does anyone have the updated part numbers ?
Hi All,
Anyone know a company in London happy to supply new Canon kit ?
Just asking...
Dear All,
I have a 2220i that was working fine. Tried an update via the Canon server which crashed twice so I gave up.
Switched device off, work day over. Came back in the morning, switched...
Sounds like fuser. Replace bearings in pressure roller as they seize up. XG9-0172-000 x2
Looks like a font issue.
Have you tried changing dpi ?
Hiya,
I would check the quality of the paper. Take out a ream and have a look. Different shades of white indicate different quality paper.
I presume you have changed the actual pick up roller.
Hi all,
I have a Canon scrapper 5051 and 1 x working 5051', 5045 with fiery's.
2 x Finishers, 1 of which is a booklet
Please see attachment.
£200
Hiya,
Have you swapped the chips on the drums ?ie Put old chip on new drum ?
Connect cable from machine to fiery. Connect another cable from network port to fiery.
Setup fiery in network settings. You will need the password for the fiery. I think default it Fiery1
Hi there,
I have not had this problem but would suggest you recheck the plugs to ensure you have not missed one out on the right hand side of the board thats hidden.
Other than that I would...