Search:

Type: Posts; User: StephenB

Page 1 of 9 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    254

    [Jamming] Re: MP 2550 tray paper presence

    Agree with Slim, if the paper empty does not light up, it's probably the sensor arm off it's holder or a bad sensor.
    Other common issues with the 2550, make sure the white tray lift gear is not...
  2. Replies
    6
    Views
    622

    Re: Ricoh C3003 fuser and C2503 fuser

    I would like to use a C2503 fuser in a C3003. The C2503 fuser does have the internal shutter just like the C3003.

    However the C2503 has a different insert tab on the lower plastic cover of the...
  3. Replies
    6
    Views
    622

    Ricoh C3003 fuser and C2503 fuser

    I see that the C2003 fuser will work in the C3003 and C3503.
    The Fixing film assembly for the C2003 is the same for the C2503.

    The only difference I can see which prevents the C2503 fuser from...
  4. Replies
    10
    Views
    2,698

    Re: Ricoh MP 5055 poor density

    Solved ! Turned out to be the ID sensor which is below the transfer roller. Wiped the sensor, which was coated with toner. ...
  5. Replies
    10
    Views
    2,698

    Re: Ricoh MP 5055 poor density

    Thanks for all the suggestions, I did notice on the 5055 , SP 3-322-001 the adjusted Ifsg is way higher than the setting in 3-322-011 which indicates a dirty ID sensor.
    I am returning today to the...
  6. Replies
    10
    Views
    2,698

    Ricoh MP 5055 poor density

    Picked up a Ricoh 5055 off lease to refurb. Print / copy density started off excellent. Has 270K total count. Quality started off excellent, did all firmware updates. All OEM toner, new OEM PCDU. Set...
  7. Re: Ricoh SP C440dn with voided vertical line on color prints only

    I've seen this....something ( paper dust) or debris has gotten up in the cyan development section. Try separating the drum and dev units. You will notice a thin "void" on the mag roller.
    Something...
  8. Replies
    12
    Views
    1,194

    Re: MP4002 image density issue

    I've found that if you replace Drum, Blade, Developer, charge roller ( all OEM) together, you'll have much better performance.
    Also when your cleaning out the dev unit, check the "toner screen" at...
  9. Thread: MP501 quirk

    by StephenB
    Replies
    14
    Views
    1,337

    Re: MP501 quirk

    Regarding the 501 dreaded tray 1 lift issue....I have one out there where I added lift springs beneath the paper lift plate. So it gives the paper a "boost" when lifting.
    The paper loads similar to...
  10. [Electrical] Re: Ricoh SP C250sf - "density sensor require cleaning" error

    Once you remove the ITB, the density sensor assembly will pivot freely, allowing you to clean it with a soft cloth.
  11. Replies
    10
    Views
    975

    [Electrical] Re: Ricoh 7001 - Main motor stucked

    A more common "gear issue" with these , and it sounds awful ...is a broken fuser drive gear
  12. Replies
    15
    Views
    1,423

    Re: MP 301 shows right cover open

    Almost for sure a door issue, the hole and zip tie fix works great. Happens all the time.
    Do the repair, or the rear (right side) will break next, then the entire hinge.....and then you will need a...
  13. Replies
    17
    Views
    2,033

    Re: Ricoh MP201 not fusing and ghosting

    make a copy, open door to stop the paper feed before it gets to the fuser.
    If you have ghosting, problem is PCU related,
    if no ghosting, problem is fuser.
    Stick with OEM pcu's and toner. And...
  14. Replies
    1
    Views
    328

    Ricoh 402 duplex jams

    Only when duplexing, I am getting frequent jams as the paper enters the inverter area. I believe the sensor going into the
    inverter may be dirty or bad.
    Is there a way to get to that sensor for...
  15. Re: SP C 252SF that displays: “Misfeed: Stnd. Tray” after it prints a sheet of paper.

    Does it print OK thru the bypass - manual feed tray ?
  16. Replies
    17
    Views
    1,089

    Re: Ricoh 1515 - дon't spin the bottle

    Take the cover off the internal tray to expose the toner bottle. If it is NOT turning, I've seen where the toner feed mechanism spring is compressed away from the toner bottle. Press on it, it should...
  17. Re: Mp 9002 has stopped sending mails with office 365 since 08/18/200 (?)

    If you can't get MS 365 working, change the smtp server set up to Gmail with 2 factor authentication or use smtp2go.
    Make sure their MS 365 account is valid

    ( our ISP initially provided MS 365 at...
  18. Replies
    12
    Views
    2,173

    Re: Ricoh MPC2011 with No “AirPrint” option

    Great solution, Plug in your own wifi router and use your own I phone and try to Airprint.
  19. Replies
    12
    Views
    2,173

    Re: Ricoh MPC2011 with No “AirPrint” option

    You may want to check on the Web interface to confirm there is airprint available and make sure it's turned ON.

    Also, I've had situations where the client is logged onto the "Guest" wireless,...
  20. Thread: af 2022

    by StephenB
    Replies
    10
    Views
    952

    Re: af 2022

    I've seen exactly what you're talking about.
    There is a newer style of lower press roller bearings PN AE03-0053, which has a slight groove around the outside center which is held in place when the...
  21. Replies
    13
    Views
    1,219

    Re: Ricoh MP301 Missing Admin Credentials

    You did not say if you had tried the default login credentials, (lower case) admin , and no password ( blank).

    Always easiest thru the web interface.
  22. Re: Ricoh 401 Toner Cartridge Setting Error during firmware update

    My apologies everyone....it turned out to be a bad Toner chip (pins) reader in the 401 itself. Replaced the assembly and everything is good.
    Funny how this occurred right in the middle of a firmware...
  23. Re: Ricoh 401 Toner Cartridge Setting Error during firmware update

    I've had no issues with the Rfut, until now. But in an office, I change the IP address to prevent an accidental print. I also disconnect the fax line.

    I'm updating my problem 401 now with an sd...
  24. Re: Ricoh 401 Toner Cartridge Setting Error during firmware update

    From another thread on a different machine in SP 7-931 Toner info being reset during a FW update can cause this.

    On my problem 401, All the toner info settings are now 0h. On another working 401...
  25. Ricoh 401 Toner Cartridge Setting Error during firmware update

    I was using the firmware update tool to update firmware on an MP 401.
    About at 50 percent complete, the 401 gave a Toner cartridge setting error (Toner cartridge is not set correctly) will not...
Results 1 to 25 of 219
Page 1 of 9 1 2 3 4