Search:

Try disconnecting the hard drive then attempt firmware.

Sounds like there's an authentication device on. Turn it off.

The reset tool you mentioned is used to wipe mfp board settings when installing a used mfp board. The machine settings will remain in...

You didn't mention which firmware you were using. I usually assume someone is at the latest base firmware. If not, C558 firmware G00-U8 has a line in the pdf notes that reads:

49. While executing...

I had a similar situation with customers who print large jobs. It turned out to be the SSD Board on the 4e series. As was explained to me, when a machine is in a poor electrical environment the SSD...

Maybe you have a C654e firmware on the usb instead of 654e.

Try rolling back the function version. Softswitch 25 in service mode. If you're at 80 try 60.

I had an account where scan to smb kept failing. I had to change the function version to 60 in order...

Next step would be main drive and checking voltages to see if you have a prcb issue.

Main drive is a pain to take out. I've had like three new 8 series machines have issues in the main drive, like...

Airprint does not need a license. It's the function version like Emujo said.

Can you run the machine at all? If you run it is the fuser warm? Maybe the coil unit, although I don't think I've ever replaced one on any machine.

I've had these IU's be bad straight from Konica. Had a couple of times where I put in a brand new one and get the corner shade.

If you work for konica make sure to call parts and let them know...

This has fixed 3201/3205 for me a number of times.

-------------------------------


Article ID: KBA01500433

ErrorJam code 32-01

Root CauseJam code 32-01 occurs only on the first...

It doesn't look like there's a way to change the web connection port number.

What is it you do remotely? There's also remote panel. I think you can change the remote panel port number.

Also,...

Sorry for the confusion. I changed the DC Power Supply. DCPS1. I'm not saying it's definitely the cause but it fixed my problem.

Here's the other thread I mentioned. Thanks to Mick01 for the...

Power supply

Had this recently. Replacing the HV Unit fixed it in my case. I found the answer on another thread on this forum but can't find it now.

This is a windows issue, nothing to do with the konica driver. If you search "windows 7 new windows open in background" in google, you'll see lots of pages with people reporting that same issue...