Search:

Hi All

Thanks all for the input.

We first tried the Base Board which made no difference to periodic locking up. We then partitioned an SSD from a new (unboxed) copier and thought we'd...

Hello everyone

Can anyone help with the procedure for finding/ re-inputting the Scanner and MAC address numbers on a Konica Minolta Bizhub C300i please? These messages are displayed on screen.
...

The lines are through all colours, it just doesn't show up so well in the photo. Can you remember what you changed to get rid of it? KM support said change the laser P/H pwb, but no guarantees.

I...

Hi All

We have a KM C452 which produces gridlines through the prints. A bit of background - it's had new image units where over life, new black developer and drum check for life, but when looking...

Hi All

I have an issues with jamming in the vertical transport section on a Kyocera FS C8520. I have cleaned the vertical sensor. The paper gets to the transfer belt/ transfer roller and then just...

We had a problem with C6751 on a C200 yesterday, and despite checking CCD BCRU Board etc it refused to resolve. WE then updated the firmware and it fixed the issue straight away.

Thanks for your reply.

I did take off the thin mylars which hang down below the belts and that seems to have fixed the problem. Ive not re-ordered new ones as it appears they run fine without...

Hi All

I have an FS529 fitted to a Bizhub 423, which was originally jamming. I found the conveyance unit plastic frame snapped off where it screws to the rear rail, and the open latch switch...

We are looking for a copier technician preferably for Konica Minolta range, but not essential.

To cover Sussex, England, UK. Good salary, training , vehicle etc. Full time post.

Please apply to...

Hi all

We have a client who is looking to configure their Xerox D110 copier for Papercut. We've found it needs the Job Based Accounting Option installed but cannot get one off the shelf. Can...

Hi All

We are urgently seeking a Field Service Technician to cover our base mainly across Sussex, England. Preferably Konica Minolta trained but not essential as training given.

Good reliable...

Hi All

We are currently looking for a Field Service Technician to cover our service base, mainly across Sussex. Konica Minolta experience preferred but not essential.

Company has long and...