hello eveyone,
I'm relatively new to these A3 HPs. I have a few of this series that, according to the customer, "take forever to boot" in the morning. so far i've been able to get away with just...
Type: Posts; User: Boringguy4
hello eveyone,
I'm relatively new to these A3 HPs. I have a few of this series that, according to the customer, "take forever to boot" in the morning. so far i've been able to get away with just...
guys,
i have a new (about a month old). Enterprise E82540 that isnt recognizing the toner anymore. tried putting a new toner in and its still saying that the toner isnt installed. i got it running...
Thank you! just had this come across my call board. i'll know what to check first.
Has anyone had recurring screen failures on this model, possibly the MX3150 as well. i replaced a screen in January and the customer is stating its not working again.
I did have a bad one right out...
I need a Parts Guide for this machine. more specifically i need a part number for the fuser exit unit that included the set of roller directly after the fuser.
thanks
If I could, I would.
Electrical issues cause all sorts of weird problems. Those zip ties will break the wire inside the sheathing.
can anyone post a 3252ci manual. or post a link or a download?
thanks
i had one as well, I replaced every board, nothing fixed it, so we replaced the machine. I also had a Konica with a similar issue. figured out it was a section of the wire harness (probably a pinched...
if it's a newer machine, you'll need a Xerox PWS to access it. They are extremely proprietary when it comes to manuals.
Since the 13.01 comes up as a tray 1 jam. I went ahead and just ordered the whole tray 3 assembly. Hopefully that will take care of it.
My worry is it's a timing issue. Since it stops right before...
Guys,
I'm relatively new to in-depth HP stuff. I have a 4015 with jams from tray 3 (the extra cassette), paper stops right before the registration rollers. It will feed from tray 2 without issue....
I need some help, until now I've been an A3 tech, with a few A4s sprinkled in, Konica, Sharp and Xerox. Now i'm mainly HP.
I have a customer complaining that their HP PageWide 586 is giving a...
I second reloading software. In my experience Xerox's software isn't that stable. But it could also be a scanner issue. I had an older DC250 with the piggyback network controller box, it would error...
Not running command workstation. I wish they were. Theyre using the embedded ic602 or ic603 konica controller. I got it wrong at first. Sorry, I'm still new to the controllers and like i said, this...
Apparently its happened with different files. Its a label for pallots of stuff. Printed on plain 20lbs 8.5x11 paper. And once they delete the stuck job they can print that file again.
One page, color pdf file with minimal graphics. 900 copies of said page. Stored on PC printed through adobe. Intermittent at best. Ill have to find out if its just one users workstation or multiple.
We only have one 1060 with the embedded controller. Everything else has a fiery. Customer sent a print job last Friday and it's Monday and it's still saying that it's processing the job. Delete the...
Yes, its two machines. Its very possible theyre connected to a fax ATA, but i dont know for sure. Ive asked and no obe there knows either. One of the machine's wall port says "fax analog only". But...
Works fine off the glass. Only through adf. On two different machines, in different buildings. But the same customer.
Yes. And scans go through fine, smb, email and USB. Its only fax.
Yep, thats how i recalibrated it. And on the screen it diaplays the correct size. Of long side first 8 1/2x11. Still sends through as 8.5x5.5 half sheet.
They are, even recalibrated the adf. Copy and scan work fine, which lead me to believe it's a voip issue.
Same company, two different buildings two e series machines. When faxing long side first through the adf. The fax is sent out shrunk 50% and printed as if its being folded. 5.5x8.5 on half sheet....
We have a client that has two ancient bizhub 200s. Different towns, but theyre all connected the same server. The issue started when they upgraded from a server 2008 system to 2012. The one is...