we still have loads of these pieces of crap where im currently based and been having this issue since beginning of Covid. the info we received was that the composition/formula for the toner had to be...
Type: Posts; User: 8T2
we still have loads of these pieces of crap where im currently based and been having this issue since beginning of Covid. the info we received was that the composition/formula for the toner had to be...
and this morning the PCL3 driver stopped cutting paper. just got the call now will hopefully get there during the course of the day but this was an issue we had previously on that same T630 when it...
my issue was with a whole bunch of windows 10 PC's and cant recall the version of the driver now unfortunately but am convinced it is a windows 10 update thats messing around again because had random...
under correction but I think the 3003 will work in a 2003 but not the other way round. 3003 has higher wattage lamps so the 2003 fuser throws warm up errors if used in 3003
Sent from my SM-A305F...
is the firmware up to date? its been a while and cant remember where to find it on web image monitor but you could print out detailed network configuration list from user tools and on last page it...
had similar issue on 6 month old T630 Monday. was working fine then it stopped rendering and printing text/font on drawings but only the 1st page of a job.
updated to latest HPGL remotely and...
have you tried turning the dev unit by hand?
Sent from my SM-A305F using Tapatalk
if there is still toner in bottle my bet is on a failed toner supply coil.
if the complete PCDU was replaced due to a seized dev unit its guarenteed to have backed up and twisted it off.
these...
is it doing from a specific program or application or all prints? does it do it when printing internal print like counter or config page too?
Sent from my SM-A305F using Tapatalk
i just grab the top plastic cover in the centre where the developer is gathering and pull it up and away from mag roller for a few seconds.
these pcdu's are heavy and that cover deforms easily...
try a different driver.
those look very similar to the lines a colleague at work had the other day. he was having loads of fun with his test print because driver is the last thing anyone guessed....
Correct. Have had paper damp enough to jam on first page coming out fuser/exit section or even sticking to transfer roller or drum in severe cases.
Sent from my SM-A305F using Tapatalk
Any condensation on the fuser exit guide when the paper gets stuck?
Sent from my SM-A305F using Tapatalk
Off topic but the duplex open/close gate that always breaks on these can also be removed completely in lots of cases and the machine works fine. Still trying to pinpoint the cause on the machines...
I honestly never tried it with both levers removed. I was afraid it will cause equally light prints on both sides but now that you mention it it makes sense that it won't raise the 1 side if there is...
Why do you suspect a controller malfunction?
Sent from my SM-A305F using Tapatalk
Cursed by working on a site that still has a boatload of these and 99% certain you have a busted transfer lock lever
D0396229 LEVER:SET:FRONT
D0396230 LEVER:SET:REAR
Usually it's just the...
Burnout is real and the longer you stay in the game the easier it gets to become extremely frustrated and annoyed by company policies and management decisions that you feel are hindering your...
I hope you find something soon and takes you in a fantastic direction.
Sent from my SM-A305F using Tapatalk
Where you going Mark? I enjoyed our interactions and wish you all the best with your next move.
Sent from my SM-A305F using Tapatalk
Then my bet would be on out of date firmware. Someone probably trying to print something off the net for instance
Sent from my SM-A305F using Tapatalk
What does the SMC report say?
Sent from my SM-A305F using Tapatalk
Please edit post and remove confidential codes?
If there is nothing wrong with fuser you can reset with a fuse or try the switch trick (never managed to do the switch trick successfully myself...
MPc2003/2004 and IMc200 range all suffer from this in my experience so far. Time for a new PCU.
Force toner supply works until the machine does process control then it de-tones itself and then...
As a South African with our struggling electrical grid I immediately start thinking electricity supply issue if both of them do it. Especially if they seem to do it at the same time. If possible...