I am also having slow printing problem with 5235 .
Upon switching on, the machine starts normally
But after the machine is ready it displays starting up
In the bottom part of the display for at...
Type: Posts; User: geltrons
I am also having slow printing problem with 5235 .
Upon switching on, the machine starts normally
But after the machine is ready it displays starting up
In the bottom part of the display for at...
Thanking all for the suggestions and replay.
The copy/print counter of the machine is around 400,000 pages for one machine and less than than for the second .
i have been using ...
yes charge counter is reset
Good day to all .
requesting help to solve the below mentioned issue in kyocera 5500/5501 .
for a single print or copy the, the quality is ok
.but while printing and copying multiple pages, ...
how to reset samsung c430 drum
good day all
i am facing a strange problem in canon ir 7105 .
the paper feed to duplex unit is crumbled and stuck
pls refer the attached image
4047040471
i have done everything...
that was a good thinking
we checked weather the LAN is POE but no.
Plenty of printers and computers are connected with the same switch.
also tested one 5500 connected to a small LAN switch ...
no the power supply side is OK
we are using the non faulty kyocera machines in the same power line
i also have the same issues
purchased 6 and once installed and configured 3 lost display
installed the main board in a working machine and found the
same problem.
confirmed faulty...
GOOD DAY TO ALL
we are facing a strange issue with Task Alfa 5500i machines .
Installed 6 machines in a company ( these machines are refurbished )
configured printing and Scan to network...
Good day all
I have a Rex rotary color MPC2051
the problem is paper get jammed just before entering the fuser unit.
Replaced the sensors but the result is same
I am new to...
Good Day Dear
I have an issue with Canon ir 600
The customer has transported the machine to a different location and
on start up all the error lamps are lit and displayed please wait ...
Good day All
I was trying to repair the Xerox work centre 6400 for not detecting the black cartridge.
but once it is restarted no display o the touch panel . When strats the display flashes...
Good day Dear
First of all, Thank you very much.
executed your step by step instructions and the machines are OK Now
It is detecting the Red shade properly
Once again Thank you...
Thank you very much for the quick replay
i can post you the result by tomorrow only ( i do not have the access to the machine now )
Any way, Thank you very much
Thomson
Yes That is correct
when we place a Color Doc (that has RED) on Glass of the B & W PRINTER , that color will not show up on printed B &W copy.
The lighter cyan and yellow are appearing. (...
Good day
IR 2030 is not displaying the menu you mentioned.
service mode display is same as ir 2016 machines
so i could not not proceed . kindly tell me how with
this type of machines
good day dear
thank you for the advice
i will revert the result upon performing the same
regards
Thomosn
Good day All
I am having 5 canon ir 2030 machines. while copying a document with red image or lines it do not appear in copy.
but while printing it is Ok, while scanning the same document...
Good day All
I have a Canon Ir 4570 which feed only one paper from ADF upon pressing the start button. When pressed the start button second time gain I page is feed
can any body help...
good day to all
have a minolta c450 , after a power failure displayed c-d370. rested the machine using stop-0-7-1-3-9.
after restart displayed japanese language, changed the marketing...
Thank you very much for your comment/suggestions.
Frankly, i haven't inspected the machine yet since it is on board the ship
anchored few miles from the shore.
I may get few hours to inspect...
One of my customer (ship ) is having Sharp Mx 2301 multifunction copier.
When the "waste toner full" message came they removed,cleaned and
washed the waste toner bottle, installed it back....
looking for sharp MX 2301 service manual
The error is 50.9 fuser error .
Drum is rotating and up to 2 inches of image is transfered to the paper
regards